Post a pic of your last mod
#271
Pole Position
Thread Starter
Join Date: Nov 2013
Location: Ny
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
#272
Pole Position
Thread Starter
Join Date: Nov 2013
Location: Ny
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
nice man cool toy right there lol I been looking for carbon fiber mirrors tho or mirror s cover the only one I found is for RHD ISF It say it won't fit the US MODEL :-( but I'm thinking on getting it anyway to see if I can make it fit
#277
#279
You paid 5300 for headers....... That is BALLIN
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#280
Lexus Fanatic
#282
Pole Position
iTrader: (3)
Sensor 1 is actually the A/F sensor, Sensor 2 is the oxygen sensor. FYI It was installed correctly if you read the post you quoted the sensor was overtorqued from the previous install...I have had headers installed three times all with the original sensors. Most people replace the sensors at install I've had good luck until now. The reason I had a CEL on my PPEs is because PPE wired the o2 extension wrong so we had to switch the pinouts so...it's been a manufacturer error.
#283
We had 2 harnesses that had the wires switched from the place that made them. We check all harnesses now before they ship.
Sensor 1 is actually the A/F sensor, Sensor 2 is the oxygen sensor. FYI It was installed correctly if you read the post you quoted the sensor was overtorqued from the previous install...I have had headers installed three times all with the original sensors. Most people replace the sensors at install I've had good luck until now. The reason I had a CEL on my PPEs is because PPE wired the o2 extension wrong so we had to switch the pinouts so...it's been a manufacturer error.