DYNOmite any one tried this?
02-03-14, 06:19 PM
#1
Lead Lap
Thread Starter
Join Date: Dec 2012
Location: pr
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
DYNOmite any one tried this?
History short my F is 2008 I got ppe, hps w afe wet,and iss forged qes.I laid down today on the DYNOmite dyno 357.8whp . I think something is off w the dyno or the iss forge robbed a lot of power!!! Ill have to re test on the dyno jet again and compare this numbers.
I used to do my dynos on a dyno jet, but since I moved whats available is a DYNOmite . I think this dyno reads offly low and i cant tell wether the exhaust gave power or robbed some.
Last time I tested the car on the dynojet it laid down 370whp with only a joe z intake tube with afe wet and ppe headers. Everything else stock and I still had the sec cats on place. Before that stock 340whp
I used to do my dynos on a dyno jet, but since I moved whats available is a DYNOmite . I think this dyno reads offly low and i cant tell wether the exhaust gave power or robbed some.
Last time I tested the car on the dynojet it laid down 370whp with only a joe z intake tube with afe wet and ppe headers. Everything else stock and I still had the sec cats on place. Before that stock 340whp
Last edited by KOKISF; 02-03-14 at 06:23 PM.
02-04-14, 06:39 AM
#3
Instructor
you should be right around 400whp with your mods. as most will say way too many variables with dyno's. track testing FTW!
02-04-14, 08:47 AM
#4
I'm going to recommend you reset the ECU and start driving aggressively or visit a shop with a dyno... The ecu needs to relearn how you drive the car with the new mods. (Start doing as many hard pulls as possible)
When I got my headers installed we dyno'd at 365whp... disappointed with our results my tuner called SIKKY and they recommended we do 5-6 hard pulls on the dyno letting it cool in-between... after that my car kept creeping up 370/385/390 eventually to 400+ whp.
When I got my headers installed we dyno'd at 365whp... disappointed with our results my tuner called SIKKY and they recommended we do 5-6 hard pulls on the dyno letting it cool in-between... after that my car kept creeping up 370/385/390 eventually to 400+ whp.
02-05-14, 03:43 AM
#5
Lead Lap
Thread Starter
Join Date: Dec 2012
Location: pr
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Went to the dynojet last night to get this out of the way, the result was 3 pulls of 400whp with 91 oct now im happy with the numbers because in the same dyno and contitions w ppe an stock exhaust we yielded 370whp , we imstlled iss forged qes and boom 30 whp more
02-05-14, 11:05 AM
#6
Instructor
sweet! nice numbers!
Trending Topics
02-05-14, 03:59 PM
#8
Lead Lap
Thread Starter
Join Date: Dec 2012
Location: pr
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
You will !!! Let us know how it goes , to be honest the guy i bought the iss forge he had an F w takaeda amd iss forge , qes,i raced him with a joe z intake, and ppe with sec cats removed and I pulled him very nasty , what im trying to say headers is the way to go
Thread
Thread Starter
Forum
Replies
Last Post
RSXiMUS
IS F (2008-2014)
56
05-19-16 11:59 AM