Another Happy BC Coilover Install - Thanks FIGS Engineering
#1
Rookie
Thread Starter
![Thumbs up](https://www.clublexus.com/forums/images/icons/icon14.gif)
I recently purchased a set of BC coilovers from FIGS Engineering and thought I would express my satisfaction with both the customer service and with the delivered product. Mike responded quickly to my questions and was nice enough to talk with me on the phone. As many of you already know, this is the place to go! ![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
The installation was on a 2013 ISF. Installed product specs:
BC RACING BR SERIES COILOVERS WITH SWIFT OPTION (Rate-Based Selection)
- SWIFT SPRING UPGRADE: YES
- Spring Rate Rear: 12k(IS300 Extreme Drop)
- Spring Rate Front: 16k
- EXTREME DROP (20mm lower): NO
Sorry an advance for not posting some pictures. As soon as I get things setup how I want, I'll post some pictures of the finished product. I might have to go the tires shop to get a little more stretch on my front tires to achieve the desired ride height. I'm running 20" Vossens CV7's.
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
The installation was on a 2013 ISF. Installed product specs:
BC RACING BR SERIES COILOVERS WITH SWIFT OPTION (Rate-Based Selection)
- SWIFT SPRING UPGRADE: YES
- Spring Rate Rear: 12k(IS300 Extreme Drop)
- Spring Rate Front: 16k
- EXTREME DROP (20mm lower): NO
Sorry an advance for not posting some pictures. As soon as I get things setup how I want, I'll post some pictures of the finished product. I might have to go the tires shop to get a little more stretch on my front tires to achieve the desired ride height. I'm running 20" Vossens CV7's.
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Congratualtions and I agree with your statements about FIGS Engineering customer service as I was once considering the BC coil overs and they where very diligent about answering my questions and concerns.
Also Please post before and after pictures especially on the CV7 wheels as I have the CV3 an often wonder how mine would fit and look with the BC coli overs...thanks.
Also Please post before and after pictures especially on the CV7 wheels as I have the CV3 an often wonder how mine would fit and look with the BC coli overs...thanks.
#3
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Well, the unfortunate thing is my SD card recently corrupted itself in my phone and I lost a bunch of pictures. I'll dig through the photo's to see if I can find more - but here is an "adjusted contrast" photo to accentuate the gaps between the tire and the fender:
https://www.dropbox.com/s/x5o6l7og6r...enger_Side.jpg
https://www.dropbox.com/s/x5o6l7og6r...enger_Side.jpg
Congratualtions and I agree with your statements about FIGS Engineering customer service as I was once considering the BC coil overs and they where very diligent about answering my questions and concerns.
Also Please post before and after pictures especially on the CV7 wheels as I have the CV3 an often wonder how mine would fit and look with the BC coli overs...thanks.
Also Please post before and after pictures especially on the CV7 wheels as I have the CV3 an often wonder how mine would fit and look with the BC coli overs...thanks.
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Well, the unfortunate thing is my SD card recently corrupted itself in my phone and I lost a bunch of pictures. I'll dig through the photo's to see if I can find more - but here is an "adjusted contrast" photo to accentuate the gaps between the tire and the fender:
https://www.dropbox.com/s/x5o6l7og6r...enger_Side.jpg
https://www.dropbox.com/s/x5o6l7og6r...enger_Side.jpg
#7
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
Trending Topics
#9
Rookie
Thread Starter
#10
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
FIGS is great--most knowledgeable vendor I've ever talked to.
I thought the 16/12 made the car handle better. The 2011 is a pretty good car from the factory but the balance is better with the BCs and brake/acceleration squat is improved. I find the car better over medium-sized bumps and a little bit worse over potholes or small/sharp bumps. The bounciness is mostly going to be a factor of how you set your damping. I personally think that anything softer than ~12 steps from full-hard is too floaty with the 16/12 springs.
I thought the 16/12 made the car handle better. The 2011 is a pretty good car from the factory but the balance is better with the BCs and brake/acceleration squat is improved. I find the car better over medium-sized bumps and a little bit worse over potholes or small/sharp bumps. The bounciness is mostly going to be a factor of how you set your damping. I personally think that anything softer than ~12 steps from full-hard is too floaty with the 16/12 springs.
#11
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
And the reason I went to coilovers, was to have the ability to adjust the ride height - not for increased handling performance. I figured I might lose some ride quality, but so far I'm pretty satisfied.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#12
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Mike @ FIGS sold me on the BC Racing coilovers. The guy is super knowledgeable and is willing to answer any and all questions pertaining to any products available for purchase. IMO, the 16/12 combo works very well with the IS F, given how heavy it is in the front. Great all purpose coilovers, and superb customer service from FIGS Engineering.
#15
Driver School Candidate
Join Date: Apr 2014
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Can you tell us if this is the lowest setting, or is this the out-the-box setting? Noticed you opted for the "Non-extreme drop" version so wanted to know if this is the lowest it would sit on 20s.
Getting ready to order BCR coils myself so wanna make sure I order the right options.