hey good news guys,

i got a response from autostyle-usa and they can ship these aeroworks CF splitters for $214 + $112 (shipping)

so you'll save quite a bit as compared to the Jz one.

i got a quote shipped to canada. so maybe the US would be cheaper if you're from Cali.

Here's the quote:
[ Product Name ]
------------------------------------------------------------------
Make : AERO WORKS
Item name : Lexus IS-F USE20 Carbon Front Spoiler FS Type A
Quantity : 1
Price:$ 214.95
Total:$ 214.95

------------------------------------------------------------------
Sub Total : $ 214.95

Japan Post EMS:
This option includes door to door service.

Shipping Method : EMS AIR
Sub Total : $ 214.95
Shipping Cost : $ 112.00
----------------------------------
Total : $ 326.95 USD

this is the link once again if any of you are interested. remember you need to email them to get the proper shipping quote.
http://autostyle-usa.com/?pkey=item_..._url=aeroworks

 

Wow that is a pretty good bit lower than eBay. Wonder if they have the aero works front lip.

 

Isn't that first link you posted significantly cheaper though? Those are from two different companies right, a third party retailer as opposed to buying direct from AeroWorkz? I bet the manufacturer would ship directly to the US for cheaper then $112, but that may be cutting it close anyways because the box is probably pretty big. Definitely lower then ebay!

 

If someone can read japanese then they can possibly order directly from Aeroworkz. The Aeroworkz website is retailing 19200 YEN. thats roughly $190USD ? So it's a tad cheaper from Aeroworks... but problem is, how do you order

@Lmood - Yes they do have the front lip from Aeroworks, and its like $250 or something! super cheap. but i'm not sure if it is CF or not. from the picture it looks CF. But the description doesn't say.
I would think it may cost like $200-$250 to ship the lip as it is much bigger. But much cheaper than getting it from VIP .

i am debating whether to go with this cf splitter or the autotecknic one. ive read a lot of stories where the autotecknic one will snap off if not installed properly. The F is too fast, too much down force

anyways, hope this helps out some people . I think in the end I may order these aeroworkz ones since its just above $320

 

Theres a site that translates it in english, not bad lol. Try it to find a contact form and email them in ENGLISH, I'm sure someone there speaks english lol.

I used an online site translator to find a contact form and I wrote them in english to see if they well ship to the US and asked them specifically for costs to Arizona. I will let you know if they reply lol.

 

How many of you are interested in this piece?
I can see what I can do.

The listed price on aeroworks website is not the actual cost, there is Japanese local shipping, bank fee etc.
Also, aeroworks is a pretty small company in Japan. Their product are all order make.

 

hey dabs, thx for the pic. it looks great.

was how many bolts did you put in under ? just curious.

 

As for the front lip, it actually comes in 3 sections with the sides being FRP and the center is carbon fiber according to the online translator tool,


"Conformity
Type: USE20
Year system: H19/12 -

3 divided carbon lip spoilers

Center section: Carbon make　
Side: FRP make (off black paint being completed)

- Postage -
2500 Yen Kanto Tokai Shinetsu Hokuriku Kansai
2800 Yen northeast China
3000 Yen Hokkaido Shikoku Kyushu '

If you look at the pics closely its accurate, the center is CF while the outside parts are FRP

 

Any issues with sagging over time? I know the weight of some lips (if they were heavier ones) combined with the extra downforce can cause some bumpers to sag over time or leave larger gaps where the bumper meets the fenders, at least thats how it was on some of the 350z's.

 

Thanks nigel
Let get this rolling!! put your names down if you're interested. Let see what kind of quote Nigel can get us
Quote the last person that replies to this and add onto the list!

Interested members:
1) jackhui
2)
3)
4)
5)
6)
7)
8)
9)
10)

 

Since you are from Canada, I think auto style price are very reasonable and good price.
The group buy might benefit U.S. people, but not oversea.

 

damn haha. no problem. Yes, please help out those in the US!

 

I used 3 bolts under and 1 on the side

No sagging at all. Still perfectly in place and no strain on the bumper. Been on for 6 months already

Top speed reached with splitters on : 270kmph

 

Post a pic of the 3 piece lip please

 

I paid almost five an took a month. lol