Brembo brake decals
08-03-14, 05:06 PM
#16
Let me know when you get it done, and how it turned out. I been wanting to do this for awhile, either paint or powder coat!
08-03-14, 06:25 PM
#17
Tech Info Resource
iTrader: (2)
If you have a choice, don't use sand or glass beads (they're essentially the same thing). Use plastic media, nut shells, or even nickel slag, but using sand could result in a disaster if any of it gets inside the caliper. It's very, very difficult to keep it out. I've done quite a bit of this stuff, and you can't beat plastic media for removing the paint without damaging anything.
08-04-14, 03:24 PM
#18
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
If you have a choice, don't use sand or glass beads (they're essentially the same thing). Use plastic media, nut shells, or even nickel slag, but using sand could result in a disaster if any of it gets inside the caliper. It's very, very difficult to keep it out. I've done quite a bit of this stuff, and you can't beat plastic media for removing the paint without damaging anything.
Thread
Thread Starter
Forum
Replies
Last Post
JERS69
Wheels, Tires & Brakes Forum
1
10-07-03 02:29 PM
