PPE Headers Installation
#1
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
PPE Headers Installation
Edited with new pics
I dropped off my IS-F at PPE Engineering this afternoon to get some of their ceramic coated headers installed. I've realized after reading a few threads that some guys got a CEL, so being that I'm pretty local to PPE, who better to install them then the guys that make them? I decided to have take my car to the experts and have PPE Engineering do my install, in hopes that I can clear up some misconceptions that this is a PPE product issue vs. installer error. I'm super excited to get it done the right way, and paired with my Joe Z exhaust its going to sound amazing! I will update with some pics and sound clips as the progress continues. Until then, heres a pic of my F waiting to get the headers put on! Should have my Vossens by this weekend, so it will be like owning a new car again
Here are a few pics of the 02 sensor wiring extensions. Notice the bracket that was removed (it was visible in the first pic, gone in the second). According to Paul at PPE, this bracket needs to be removed allowing the extension to be routed away from the header so that it won't melt. I believe a lot of the problems with melted harnesses is due to this bracket not being removed. Also, notice the position of the wiring extension. Maybe Paul or Eric from PPE can chime in on this if I am missing something.
I dropped off my IS-F at PPE Engineering this afternoon to get some of their ceramic coated headers installed. I've realized after reading a few threads that some guys got a CEL, so being that I'm pretty local to PPE, who better to install them then the guys that make them? I decided to have take my car to the experts and have PPE Engineering do my install, in hopes that I can clear up some misconceptions that this is a PPE product issue vs. installer error. I'm super excited to get it done the right way, and paired with my Joe Z exhaust its going to sound amazing! I will update with some pics and sound clips as the progress continues. Until then, heres a pic of my F waiting to get the headers put on! Should have my Vossens by this weekend, so it will be like owning a new car again
Here are a few pics of the 02 sensor wiring extensions. Notice the bracket that was removed (it was visible in the first pic, gone in the second). According to Paul at PPE, this bracket needs to be removed allowing the extension to be routed away from the header so that it won't melt. I believe a lot of the problems with melted harnesses is due to this bracket not being removed. Also, notice the position of the wiring extension. Maybe Paul or Eric from PPE can chime in on this if I am missing something.
Last edited by RedlineAZ; 02-24-15 at 10:57 AM.
#2
Lexus Fanatic
Hey buddy congrats ! I'm sure you are going to be very happy. I'll need to swing by to hear it. Thanks for letting me check out the exhaust. Car sounded amazing and I'm am intending on getting an exhaust in the near future. I admire you and PPE for helping explain to me , in particular , about the install issue as well as to shed light on the true lack of drone with v8 exhausts . I couldn't believe how quiet you system was cruising on the freeway .
#3
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,063 Likes
on
586 Posts
Hey buddy congrats ! I'm sure you are going to be very happy. I'll need to swing by to hear it. Thanks for letting me check out the exhaust. Car sounded amazing and I'm am intending on getting an exhaust in the near future. I admire you and PPE for helping explain to me , in particular , about the install issue as well as to shed light on the true lack of drone with v8 exhausts . I couldn't believe how quiet you system was cruising on the freeway .
Looking forward to the videos with the Exhaust & PPE Headers
Joe Z
#4
Lexus Fanatic
Funny story. I was going to meet up with him in the afternoon . During the day I was running errands and saw a black ISF in a parking lot. I was excited to I had to roll by and wave. As the car passed I could hear that it had an exhaust. I texted Davis to tell him I heard an ISF in a lot with a exhaust and I thought it was a sign that I should get an exhaust ( between meeting him and running into the F with an exhaust) . What was funny was the black car was his. His wife was running errands in his car. Small world. Great exhaust. Very cool Club Lexus member.
Thanks again RedlineAZ for taking the time to let me check out your exhaust .
#5
Paul and his crew are great people. I did the same thing. I live in Tucson and drove up to Tempe to have PPE install their headers on my F. I couldn't be happier with the service they provided, not to mention the way my car sounds and performs. By the way PPE's new dual mode exhaust is amazing. I got to see it in person. The quality and workmanship put into each system is top shelf. These guys are the real deal. They truely take pride in the products they sell.
Trending Topics
#9
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
I was floored , Joe Z. Davis drove the car kind of easily and the tone of the system was deep and amazing. On the freeway when he accelerated it was like the noise of the exhaust went down as opposed to up and into the cabin and while he was cruising it was totally silent. I would have never believed it if I hadnt checked it out. Its nuts that a V6 exhaust system would drone 2 times as bad as a v8. I totally intend on adding an exhaust to my car sooner than later. I am a believer. Very happy RedlineAZ took the time to let me check it out.
Funny story. I was going to meet up with him in the afternoon . During the day I was running errands and saw a black ISF in a parking lot. I was excited to I had to roll by and wave. As the car passed I could hear that it had an exhaust. I texted Davis to tell him I heard an ISF in a lot with a exhaust and I thought it was a sign that I should get an exhaust ( between meeting him and running into the F with an exhaust) . What was funny was the black car was his. His wife was running errands in his car. Small world. Great exhaust. Very cool Club Lexus member.
Thanks again RedlineAZ for taking the time to let me check out your exhaust .
Funny story. I was going to meet up with him in the afternoon . During the day I was running errands and saw a black ISF in a parking lot. I was excited to I had to roll by and wave. As the car passed I could hear that it had an exhaust. I texted Davis to tell him I heard an ISF in a lot with a exhaust and I thought it was a sign that I should get an exhaust ( between meeting him and running into the F with an exhaust) . What was funny was the black car was his. His wife was running errands in his car. Small world. Great exhaust. Very cool Club Lexus member.
Thanks again RedlineAZ for taking the time to let me check out your exhaust .
It was really nice meeting you Tammer! Hopefully we can swing by a Cars and Coffee meet soon!
#10
Lead Lap
iTrader: (7)
Its just a wonderful mod.
I was a bit troubled to hear of ppl gutting their cats and getting the same results...lol...but ehh they look cool (if I could see them that is)
I love the sound also...and the real world feel of the extra HP...(unlike that mental HP like when ppl pop in a hi flow filter and say ,,,yeah the car is faster...LOL)
I was a bit troubled to hear of ppl gutting their cats and getting the same results...lol...but ehh they look cool (if I could see them that is)
I love the sound also...and the real world feel of the extra HP...(unlike that mental HP like when ppl pop in a hi flow filter and say ,,,yeah the car is faster...LOL)
#13
Lexus Champion
iTrader: (9)
^^^^No! It fizzled out as I knew it would.
https://www.clublexus.com/forums/is-...me-soon-5.html
Lou
https://www.clublexus.com/forums/is-...me-soon-5.html
Lou
#14
Lexus Fanatic
Pretty small world huh?! My wife was excited about bumping into another IS-F and funny how it ended up being you lol. I appreciate the kind words! I'm glad you liked the exhaust! It is definitely a lot harder to tell how an exhaust sounds from a video, no videos do this Joe Z exhaust justice! Same with the PPE headers, I highly encourage any of you guys looking to get one to meet with a local forum member that has one and check it out in person. They sound amazing! I should have my car back from header install tomorrow. The anticipation is killing me! LOL!
It was really nice meeting you Tammer! Hopefully we can swing by a Cars and Coffee meet soon!
It was really nice meeting you Tammer! Hopefully we can swing by a Cars and Coffee meet soon!
#15
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
It was a pleasure , Davis. I really appreciate you taking the time to let me check it out. It was a pleasure meeting you and I look forward to hitting Cars & Coffee with you in the future. I am dying to hear what your beast sounds like now. Add to that the Vossens and you have yourself one bad *** F !!!