Joe Z intake question
#1
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Joe Z intake question
Hey guys, quick question about the Joe Z intake. These two hoses that connect to the Joe Z intake are on there pretty loose, and slide off pretty easily. The OEM intake has little ridges around the top of the pipe to stop the hoses from backing themselves off, but the Joe Z doesn't.
Is this going to cause any issues? I attempted to slide those little metal fasteners to different levels on the hose to see if they can hold on to the intake better, but it didn't make a difference. Does that need a perfect seal to avoid any CEL or drops in performance or anything like that? Thanks guys!
Is this going to cause any issues? I attempted to slide those little metal fasteners to different levels on the hose to see if they can hold on to the intake better, but it didn't make a difference. Does that need a perfect seal to avoid any CEL or drops in performance or anything like that? Thanks guys!
#6
#7
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
When NEW.. The OEM hose & clips are tight as hell...
As they wear with time we noticed that as a customer attempts to install, the hose has lost its ability to remain snug with the OEM clip..
Solution A: Needle nose pliers to the clips and bend more spring into the spring
Solution B: Mini Hose Clamps (as you did)
Happy Holidays
Enoy
~ Joe Z
As they wear with time we noticed that as a customer attempts to install, the hose has lost its ability to remain snug with the OEM clip..
Solution A: Needle nose pliers to the clips and bend more spring into the spring
Solution B: Mini Hose Clamps (as you did)
Happy Holidays
Enoy
~ Joe Z
Trending Topics
#8
Lead Lap
iTrader: (3)
So, I installed my blue JoeZ intake last night and took off what seems to be a pretty close replica of that intake. Full disclosure, I never really paid attention to the intake before last night and realized that this is certainly not OEM for a '12. Anyone recognize this intake tube, there are no manufacture markings on it whatsoever.
#9
Lead Lap
Thread Starter
iTrader: (5)
Join Date: Jun 2014
Location: Arizona
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
So, I installed my blue JoeZ intake last night and took off what seems to be a pretty close replica of that intake. Full disclosure, I never really paid attention to the intake before last night and realized that this is certainly not OEM for a '12. Anyone recognize this intake tube, there are no manufacture markings on it whatsoever.
Attachment 349722
Attachment 349722