Pic request: Front bumper, bottom
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: MD
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Pic request: Front bumper, bottom
I've been searching for a pic of IS-F front bumper, bottom view. I'm trying to figure out whether the bumper tabs go under or over the under panel. Please help. Thanks.
#6
Instructor
iTrader: (1)
Can you help me by providing the part number for that very same panel? Mine ripped off a few months ago while I was on I-95. The car is lowered on swift springs and unfortunately made contact with the pavement. I'm gonna end up having to buy a new bumper as well as all the tabs ripped off the bumper too. Thanks in advance!
Trending Topics
#8
Tech Info Resource
iTrader: (2)
51441D is the engine undercover. There is another cover in front of that. Depends which one you need.
The undercover isn't cheap, AMHIK.
Just did a quick check - the '08 and '09 use the expensive one. They changed it for MY '10, and it's a lot cheaper. Not sure what is different though.
The undercover isn't cheap, AMHIK.
Just did a quick check - the '08 and '09 use the expensive one. They changed it for MY '10, and it's a lot cheaper. Not sure what is different though.
Last edited by lobuxracer; 12-23-14 at 12:21 PM.
#9
Instructor
iTrader: (1)
Thanks for the replies and input guys. My model year is a 2011. Hopefully it ends up being cheaper than the older MY's. I'm gonna weigh a few options before making the purchase. I want to keep my car prestine as possible.
51441D is the engine undercover. There is another cover in front of that. Depends which one you need.
The undercover isn't cheap, AMHIK.
Just did a quick check - the '08 and '09 use the expensive one. They changed it for MY '10, and it's a lot cheaper. Not sure what is different though.
The undercover isn't cheap, AMHIK.
Just did a quick check - the '08 and '09 use the expensive one. They changed it for MY '10, and it's a lot cheaper. Not sure what is different though.
#10
Tech Info Resource
iTrader: (2)
Plan to buy a bag of the green plastic inserts for the screws holding the cover too. They are too easily damaged, and even Lexus techs strip them out (there were two completely useless ones on my undercover, and only Lexus had this cover off previously for the coolant pump replacement). They are part 90189-06066. I bought a bag of 10 of them and I've been through 4 already - two from Lexus and two of my own. They're very easy to overtighten and strip.
#11
Instructor
iTrader: (1)
Thank you lobuxracer, duely noted.
Plan to buy a bag of the green plastic inserts for the screws holding the cover too. They are too easily damaged, and even Lexus techs strip them out (there were two completely useless ones on my undercover, and only Lexus had this cover off previously for the coolant pump replacement). They are part 90189-06066. I bought a bag of 10 of them and I've been through 4 already - two from Lexus and two of my own. They're very easy to overtighten and strip.
Thread
Thread Starter
Forum
Replies
Last Post
CrazySC300
SC- 1st Gen (1992-2000)
20
01-27-12 07:20 PM