Thinking about Adams rotors
#16
Driver
Thread Starter
Holes and slots do not improve cooling, and actually reduce thermal capacity. There are reasons for holes, but they are not for cooling, and on iron rotors, they are really only for appearance.
The OEM rotors are very capable at the track, the only problem is they have the same problem all drilled/holed rotors have - they crack sooner than blanks or slotted rotors. On a track where brakes are heavily taxed they will crack beyond limits in a few weekends. Other tracks, not so much, but still will not outlast blanks or slotted rotors.
Rotor performance is really about longevity. While there are some differences in alloys, they are all cast iron, and the only real differences are how they are vented. The surface friction differences can be solved with pad selection, so the real question is, how long do you want them to last under severe use? You will be hard pressed to beat the OEM rotors without spending a lot more money up front.
The OEM rotors are very capable at the track, the only problem is they have the same problem all drilled/holed rotors have - they crack sooner than blanks or slotted rotors. On a track where brakes are heavily taxed they will crack beyond limits in a few weekends. Other tracks, not so much, but still will not outlast blanks or slotted rotors.
Rotor performance is really about longevity. While there are some differences in alloys, they are all cast iron, and the only real differences are how they are vented. The surface friction differences can be solved with pad selection, so the real question is, how long do you want them to last under severe use? You will be hard pressed to beat the OEM rotors without spending a lot more money up front.
#17
Driver
Thread Starter
#18
Here is a few dirty car but paint is good I think I have them on for half a year right when he started his new processes of doing them.
<a href="http://s836.photobucket.com/user/toky916/media/Mobile%20Uploads/image.jpeg.html" target="_blank"><img src="http://i836.photobucket.com/albums/zz284/toky916/Mobile%20Uploads/image.jpeg" border="0" alt=" photo image.jpeg"/></a>
<a href="http://s836.photobucket.com/user/toky916/media/Mobile%20Uploads/image.jpeg.html" target="_blank"><img src="http://i836.photobucket.com/albums/zz284/toky916/Mobile%20Uploads/image.jpeg" border="0" alt=" photo image.jpeg"/></a>
#19
Driver
Thread Starter
Here is a few dirty car but paint is good I think I have them on for half a year right when he started his new processes of doing them.
<a href="http://s836.photobucket.com/user/toky916/media/Mobile%20Uploads/image.jpeg.html" target="_blank"><img src="http://i836.photobucket.com/albums/zz284/toky916/Mobile%20Uploads/image.jpeg" border="0" alt=" photo image.jpeg"/></a>
<a href="http://s836.photobucket.com/user/toky916/media/Mobile%20Uploads/image.jpeg.html" target="_blank"><img src="http://i836.photobucket.com/albums/zz284/toky916/Mobile%20Uploads/image.jpeg" border="0" alt=" photo image.jpeg"/></a>
#21
I have Adams Rotors on the front of my F. My experiences are outlined below:
https://www.clublexus.com/forums/is-...nt-rotors.html
https://www.clublexus.com/forums/is-...-brakes-2.html
I still have them on my car, and with my Ferodo DS2500 Pads (obtained from Forum vendor SpeedFreaksUSA) they provide very powerful performance. They are still true and are wearing very well.
However, because of my past experiences with the flaking paint on the hats, the substandard packaging they were shipped with and the, IMHO, extremely poor customer service from the vender I cannot recommend them.
If you do decide to go with them, I recommend against paying extra for the painting of the hats.
Lou
https://www.clublexus.com/forums/is-...nt-rotors.html
https://www.clublexus.com/forums/is-...-brakes-2.html
I still have them on my car, and with my Ferodo DS2500 Pads (obtained from Forum vendor SpeedFreaksUSA) they provide very powerful performance. They are still true and are wearing very well.
However, because of my past experiences with the flaking paint on the hats, the substandard packaging they were shipped with and the, IMHO, extremely poor customer service from the vender I cannot recommend them.
If you do decide to go with them, I recommend against paying extra for the painting of the hats.
Lou
Thread
Thread Starter
Forum
Replies
Last Post