Will 18x8.5 +35 offset fit ISF?

Reply Subscribe

Thread Tools

Search this Thread

08-01-18, 11:11 PM

#16

eyefone

Driver School Candidate

Join Date: Jun 2017

Location: Arizona

Posts: 11

Likes: 0

Received 1 Like on 1 Post

I'm currently running a 18x8.5 +35 square set up, 255/40 tires and camber -2° front -1° rear. No rubbing issues until I put 5 mm spacers on all fours. Fronts were fine, rears rubbed a lil. Rears would most likely clear if I rolled that inner lip in the rear fenders.

So if you want 18x9.5 with 285s in the back, a minimum of +43 offset would probably best.

I've never seen an 18x9.5 +43 though, unless it's built to order.

Reply Like

08-02-18, 05:45 AM

#17

glerink

Driver

Join Date: Mar 2014

Location: FL

Posts: 168

Likes: 1

Received 17 Likes on 17 Posts

Quote:

Originally Posted by Jwconeil

I have yet to see anyone run a 9.5 et 38 on here. I have questioned if this offset will clear with zero feedback. There is one member running a 40 offset, but he had previously rolled his quarters and so he cannot speak as to fitment. Most squared setup members are running 45 offsets.

There is a couple people here that are actually running square setups of 18x9.5 38 with 275/35 both of them rolled fenders at the rear for previous setups, so I can't say if the 18x9.5 would've required a roll of fenders at the back. Diameter wise a 285/35/18 is about the same as the stock tire, I think it comes down to how aggressive your drop is because the tire is wider

Last edited by glerink; 08-02-18 at 08:35 AM.