PPE Equal Length, Long Tube Headers
#1
PPE Equal Length, Long Tube Headers
PPE Engineering has been getting lot's of inquires from us ISF owners about the feasibility of making an Equal Length Header for the ISF similar to the one they make for the RCF. Since I am a past customer, live nearby, have another vehicle and am a pretty nice guy they called and asked if I might be interested in having my car test fit for Equal Length Headers. Are you Crazy - Sure I would
While discussing this with them, I suggested that if modified RCF Headers wouldn't fit, maybe they could accomplish the equal length task by using long tubes. Well, it seems that RCF headers will in fact fit in an ISF, and the headers they built for me were also Long Tube. How sweet is that?
But, the EL, LT headers must be used with the PPE Exhaust due to the exit point of the collector.
Now the disappointing part. I went for Dyno testing yesterday, and it appears I lost 7HP at the top end and gained only 1.5 lb ft of torque at the high end. I also gained grunt at the bottom. My Seat of the Pants tells me the car is faster
I don't know why it ran out of breath at the high end. Nothing else has changed.
PPE Headers
PPE Dual Mode Exhaust - With HiFlow Cats
Takeda Intake
As far as sound goes, in the cabin with the exhaust open, the drone remains in the same area (between 1900 and 2100 RPM) but is much lower in volume. I can now carry on a phone conversion (with bluetooth hands free) with the exhaust in the open position. The volume level does increase, however, when under acceleration through that RPM range.
Now the ISF does not have a lumpy engine by any means, but it idle with the old headers, the sound (both inside and outside the car) had a sort of lumpy growling quality to it. The sound is now very smooth, again inside and outside. The harmonics seemed to have changed.
Now, will I go back to my old system - NOT ON YOUR LIFE
Lou
Edit - I forgot about the Cats
Second Edit - My wheels and tires have changed. I'm now running RCF wheels with larger 295 vs 285 rears, so wheel weight is up a bit!
While discussing this with them, I suggested that if modified RCF Headers wouldn't fit, maybe they could accomplish the equal length task by using long tubes. Well, it seems that RCF headers will in fact fit in an ISF, and the headers they built for me were also Long Tube. How sweet is that?
But, the EL, LT headers must be used with the PPE Exhaust due to the exit point of the collector.
Now the disappointing part. I went for Dyno testing yesterday, and it appears I lost 7HP at the top end and gained only 1.5 lb ft of torque at the high end. I also gained grunt at the bottom. My Seat of the Pants tells me the car is faster
I don't know why it ran out of breath at the high end. Nothing else has changed.
PPE Headers
PPE Dual Mode Exhaust - With HiFlow Cats
Takeda Intake
As far as sound goes, in the cabin with the exhaust open, the drone remains in the same area (between 1900 and 2100 RPM) but is much lower in volume. I can now carry on a phone conversion (with bluetooth hands free) with the exhaust in the open position. The volume level does increase, however, when under acceleration through that RPM range.
Now the ISF does not have a lumpy engine by any means, but it idle with the old headers, the sound (both inside and outside the car) had a sort of lumpy growling quality to it. The sound is now very smooth, again inside and outside. The harmonics seemed to have changed.
Now, will I go back to my old system - NOT ON YOUR LIFE
Lou
Edit - I forgot about the Cats
Second Edit - My wheels and tires have changed. I'm now running RCF wheels with larger 295 vs 285 rears, so wheel weight is up a bit!
Last edited by flowrider; 04-07-16 at 10:59 AM.
#7
11 Second Club
iTrader: (2)
PPE Engineering has been getting lot's of inquires from us ISF owners about the feasibility of making an Equal Length Header for the ISF similar to the one they make for the RCF. Since I am a past customer, live nearby, have another vehicle and am a pretty nice guy they called and asked if I might be interested in having my car test fit for Equal Length Headers. Are you Crazy - Sure I would
While discussing this with them, I suggested that if modified RCF Headers wouldn't fit, maybe they could accomplish the equal length task by using long tubes. Well, it seems that RCF headers will in fact fit in an ISF, and the headers they built for me were also Long Tube. How sweet is that?
But, the EL, LT headers must be used with the PPE Exhaust due to the exit point of the collector.
Now the disappointing part. I went for Dyno testing yesterday, and it appears I lost 7HP at the top end and gained only 1.5 lb ft of torque at the high end. I also gained grunt at the bottom. My Seat of the Pants tells me the car is faster
I don't know why it ran out of breath at the high end. Nothing else has changed.
PPE Headers
PPE Dual Mode Exhaust
Takeda Intake
As far as sound goes, in the cabin with the exhaust open, the drone remains in the same area (between 1900 and 2100 RPM) but is much lower in volume. I can now carry on a phone conversion (with bluetooth hands free) with the exhaust in the open position. The volume level does increase, however, when under acceleration through that RPM range.
Now the ISF does not have a lumpy engine by any means, but it idle with the old headers, the sound (both inside and outside the car) had a sort of lumpy growling quality to it. The sound is now very smooth, again inside and outside. The harmonics seemed to have changed.
Now, will I go back to my old system - NOT ON YOUR LIFE
Lou
While discussing this with them, I suggested that if modified RCF Headers wouldn't fit, maybe they could accomplish the equal length task by using long tubes. Well, it seems that RCF headers will in fact fit in an ISF, and the headers they built for me were also Long Tube. How sweet is that?
But, the EL, LT headers must be used with the PPE Exhaust due to the exit point of the collector.
Now the disappointing part. I went for Dyno testing yesterday, and it appears I lost 7HP at the top end and gained only 1.5 lb ft of torque at the high end. I also gained grunt at the bottom. My Seat of the Pants tells me the car is faster
I don't know why it ran out of breath at the high end. Nothing else has changed.
PPE Headers
PPE Dual Mode Exhaust
Takeda Intake
As far as sound goes, in the cabin with the exhaust open, the drone remains in the same area (between 1900 and 2100 RPM) but is much lower in volume. I can now carry on a phone conversion (with bluetooth hands free) with the exhaust in the open position. The volume level does increase, however, when under acceleration through that RPM range.
Now the ISF does not have a lumpy engine by any means, but it idle with the old headers, the sound (both inside and outside the car) had a sort of lumpy growling quality to it. The sound is now very smooth, again inside and outside. The harmonics seemed to have changed.
Now, will I go back to my old system - NOT ON YOUR LIFE
Lou
Trending Topics
#10
Pole Position
Lou,
Get the tune now, and there should be some more gains to be had
Get the tune now, and there should be some more gains to be had
#12
Lead Lap
iTrader: (7)
Then sometimes you just miss that butter smooth refined Lexus V8.