Hesitant, slower and loss of responsiveness lately on ISF
06-15-18, 07:58 PM
#46
Tech Info Resource
iTrader: (2)
No, I was talking about a full reset of the TCU to original factory settings. What you got was a "reset memory" followed by a specific drive pattern. When you put in a new transmission, you have to "Set Transmission Compensation Code" which also does a reset memory, but requires inputs from the build sticker on the gearbox. Anyone with access to Techstream can perform this reset, but the drive pattern after resetting memory is very specific so I wouldn't do this without both Techstream and TIS.
06-19-18, 10:01 PM
#47
I was referring to the reset memory which clears the learned shfting parameters. No need to go further unless you're replacing the gearbox. I'm going to do this on my car and report back but iveI been traveling constantly the past few months and haven't had time to get to it. I should be able to get into it come July.
11-17-22, 11:59 AM
#48
10th Gear
Join Date: Nov 2022
Location: Washington
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate the input! Supposedly your not supposed to touch the tranny fluid at all according to what I’ve read but You suggest I still do it anyways? Any guides on how to check and top off the fluid on our tranny’s? I’m looking into that techstream, can anyone do it? Any guides on that? Thanks a lot man I hate asking questions but when it comes to the F I don’t want to mess anything up
Thread
Thread Starter
Forum
Replies
Last Post