IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Windshield Molding Cracking and Chipping Away. Anyone else have this problem? Pics

Thread Tools
 
Search this Thread
 
Old 01-07-08 | 07:41 PM
  #1  
BottomsUp's Avatar
BottomsUp
Thread Starter
Lead Lap
 
Joined: Sep 2006
Posts: 419
Likes: 0
From: ca
Angry Windshield Molding Cracking and Chipping Away. Anyone else have this problem? Pics

I was looking closely at my car the other day and noticed cracking and chipping of the molding around the windshield. I've included 3 pics..1 with an overview and 2 closeups. I didn't look at the other side, but assume it is the same.

I'm very disappointed in this considering I spent $36K on this car, purchased in Sept '07, and its garaged every night. My 5 year old Accord which sits outside everyday/night in the SoCal sun doesn't have this problem so I'm thinking WTF

Questions...
Has anyone else had this problem?
Is it a known issue, TSB, etc..?
What should I expect at the dealer?
If they replace it will it be with the same subpar materials that will crack again?
Anything else?

Thanks guys/gals

[/URL]
[/URL]
[/URL]

Last edited by BottomsUp; 10-02-08 at 12:11 AM.
Old 01-07-08 | 08:06 PM
  #2  
carchitect's Avatar
carchitect
Lead Lap
iTrader: (1)
 
Joined: Sep 2007
Posts: 672
Likes: 0
From: TX
Default

Looks like you need to get a new a-pillar molding. I wouldn't get upset. Just take it in and hopefully they will replace that for you.
Old 01-07-08 | 08:10 PM
  #3  
tshek's Avatar
tshek
Pole Position
 
Joined: Dec 2007
Posts: 243
Likes: 0
From: FL
Default

this should under warranty.
Old 01-07-08 | 08:58 PM
  #4  
ecr527's Avatar
ecr527
Lexus Champion
 
Joined: Jan 2006
Posts: 1,762
Likes: 1
From: South FLA
Default

I actually just noticed that starting to happen to my car too towards the bottom of the windshield. I haven't really looked at the top. Although my car sits outside all the time. You're right though, my old Integra sat outside for over 10 years and it never had this problem.
Old 01-07-08 | 10:34 PM
  #5  
2slow's Avatar
2slow
Lexus Champion
iTrader: (5)
 
Joined: Feb 2007
Posts: 3,124
Likes: 4
From: Norcal
Default

Maybe it's the sun thats drying out the molding. What kind of car wash fluid do you use? It could be soap residue as well.
Old 01-08-08 | 05:44 AM
  #6  
carlos's Avatar
carlos
Lexus Champion
iTrader: (1)
 
Joined: Jan 2006
Posts: 2,191
Likes: 1
From: Miami, FL
Default

Those molding's cost $35 each.
Old 01-08-08 | 06:27 AM
  #7  
passnu2's Avatar
passnu2
Lexus Fanatic
iTrader: (33)
 
Joined: Feb 2007
Posts: 13,958
Likes: 8
From: .....
Default

wow...thats crazy! they should replace it for you with no troubles but i would be interested to see why this has happened. may have just been a bad piece of rubber seal to begin with???

good luck and keep us posted please.
Old 01-08-08 | 10:58 AM
  #8  
ReLexin's Avatar
ReLexin
Lexus Champion
 
Joined: Dec 2006
Posts: 1,787
Likes: 2
From: Cape Cod, Mass
Default

not happening to mine. seems like the warranty should handle it though.
Old 01-08-08 | 12:01 PM
  #9  
i3urton's Avatar
i3urton
Lexus Test Driver
 
Joined: Jul 2007
Posts: 1,125
Likes: 1
From: ca
Default

not me... either
Old 01-08-08 | 01:49 PM
  #10  
IS350jet's Avatar
IS350jet
Pole Position
 
Joined: Sep 2006
Posts: 2,882
Likes: 1
From: Coral Springs, Fl
Default

It looks like the car has been continually washed with extremely harsh detergent, which dried them out. It should be covered under warranty but you might want to be careful of the kind of soap you use. Don't use dish washing liquid, especially if your car is parked in the sun all day. I learned my lesson the hard way when it comes to dish soap.
Old 01-08-08 | 03:06 PM
  #11  
BottomsUp's Avatar
BottomsUp
Thread Starter
Lead Lap
 
Joined: Sep 2006
Posts: 419
Likes: 0
From: ca
Default

Originally Posted by igofast
Maybe it's the sun thats drying out the molding. What kind of car wash fluid do you use? It could be soap residue as well.
I sure hope the Sun doesn't have this much effect after only 18 months. I use Zaino Z7 car wash. I even periodically put 303 Aerospace protectant (SPF40) on my exterior trim.
Old 01-08-08 | 03:06 PM
  #12  
BottomsUp's Avatar
BottomsUp
Thread Starter
Lead Lap
 
Joined: Sep 2006
Posts: 419
Likes: 0
From: ca
Default

Originally Posted by IS350jet
It looks like the car has been continually washed with extremely harsh detergent, which dried them out. It should be covered under warranty but you might want to be careful of the kind of soap you use. Don't use dish washing liquid, especially if your car is parked in the sun all day. I learned my lesson the hard way when it comes to dish soap.
I've never used disk soap. I just Zaino Z7 show car wash.
Old 01-08-08 | 03:07 PM
  #13  
BottomsUp's Avatar
BottomsUp
Thread Starter
Lead Lap
 
Joined: Sep 2006
Posts: 419
Likes: 0
From: ca
Default

Originally Posted by carchitect
Looks like you need to get a new a-pillar molding. I wouldn't get upset. Just take it in and hopefully they will replace that for you.
Yeah hopefully they will. I'm more bothered by the fact that it happened. I wouldn't expect this on a Lexus after only 18 months.
Old 01-08-08 | 03:12 PM
  #14  
Pnuge88's Avatar
Pnuge88
Lexus Champion
iTrader: (1)
 
Joined: Jan 2007
Posts: 3,348
Likes: 18
From: TX
Default

i just replaced my side pillars last month from them melting.. dam florida hotness lol and now i just washed my car i noticed that the rubber on top of the front windshield is melted and coming off.. wtfack
Old 01-08-08 | 03:35 PM
  #15  
sincityIS's Avatar
sincityIS
Lexus Champion
 
Joined: Aug 2006
Posts: 1,634
Likes: 3
From: Las Vegas
Default

Heck I am in Las Vegas where it is very common to have daytime highs in the 110-112 degree range. If it is going to happen to any car it is going to happen to mine. 1 summer down maybe 1 or 2 more left before the car becomes a memory anyways.


Quick Reply: Windshield Molding Cracking and Chipping Away. Anyone else have this problem? Pics



All times are GMT -7. The time now is 10:42 AM.