how to: tilt side mirrors during reverse
#1
Rookie
Thread Starter
Join Date: Nov 2013
Location: illinois
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
how to: tilt side mirrors during reverse
Not sure if it was announced anywhere,but I looked at the stickies and didn't see it.
When you are about to go into reverse,press the mirror adjuster "L" or "R" and leave it on either side and the mirrors will automatically tilt down on reverse,and back to it's normal postion when in drive. This only works if you leave the button pressed on either side.if you leave it in the middle it will not do this.
When you are about to go into reverse,press the mirror adjuster "L" or "R" and leave it on either side and the mirrors will automatically tilt down on reverse,and back to it's normal postion when in drive. This only works if you leave the button pressed on either side.if you leave it in the middle it will not do this.
#6
Lead Lap
iTrader: (6)
Here are how you do it:
-shift the car to Reverse and both mirrors will tilt down to factory's default position.
-while the car in Reverse, individually adjust each mirror to your liking.
-keep this as your personal setting by hit the Set button then the memory number (while the car is still in Reverse). You should hear an audible beep that confirm the settings have been saved.
-your car is now set for both forward and reverse mirrors position.
Trending Topics
#8
Driver School Candidate
You can adjust to any tilt angle you want then set the memory button and they will tilt to that setting next time. I have my passenger's side tilt way down so I could see the rear wheel which help prevent curb rash when parallel park.
Here are how you do it:
-shift the car to Reverse and both mirrors will tilt down to factory's default position.
-while the car in Reverse, individually adjust each mirror to your liking.
-keep this as your personal setting by hit the Set button then the memory number (while the car is still in Reverse). You should hear an audible beep that confirm the settings have been saved.
-your car is now set for both forward and reverse mirrors position.
Here are how you do it:
-shift the car to Reverse and both mirrors will tilt down to factory's default position.
-while the car in Reverse, individually adjust each mirror to your liking.
-keep this as your personal setting by hit the Set button then the memory number (while the car is still in Reverse). You should hear an audible beep that confirm the settings have been saved.
-your car is now set for both forward and reverse mirrors position.
thanks for the tip! i will try this later today!
#10
Lexus Champion
#13
Lexus Champion
#14
Thx for the tip...worked perfectly on my 4GS (F Sport).