MO FS: Tanabe Pro210 Springs
03-04-10, 07:51 PM
#1
FS: Tanabe Pro210 Springs
I was vouched for in this thread, but I ended up keeping my wheels.
https://www.clublexus.com/forums/whe...essor-ms1.html
These are the same springs that come on ALL of Tanabe's coilovers. I was running Tanabe Sustec Pro S-OC Type II coilovers, but they wouldn't go low enough so I bought shorter springs. I sold the coilovers with the original springs a couple months ago, so I need to get rid of these springs.
They will NOT fit stock shocks.
They will fit ANY coilover IF the inner diameter of the spring is 65mm.
The springs I have are:
Front:
10k spring rate
7in length (approx. 180mm)
65mm inner diameter
Rear:
8k spring rate
200mm length
65mm inner diameter
These springs were about 30mm shorter than the original springs, and I was able to go a good bit lower with them. I only had them on for about 5,000 miles and they were NOT on during the winter.
They retail for $100 per pair from Tanabe.
I want $120 + shipping/paypal for all four.
All Four
Fronts
http://i160.photobucket.com/albums/t...DSC_0060-1.jpg
http://i160.photobucket.com/albums/t...DSC_0061-1.jpg
http://i160.photobucket.com/albums/t...DSC_0062-1.jpg
http://i160.photobucket.com/albums/t...DSC_0064-1.jpg
Rears
http://i160.photobucket.com/albums/t...DSC_0065-1.jpg
http://i160.photobucket.com/albums/t...DSC_0066-1.jpg
http://i160.photobucket.com/albums/t...DSC_0067-1.jpg
http://i160.photobucket.com/albums/t...DSC_0068-1.jpg
https://www.clublexus.com/forums/whe...essor-ms1.html
These are the same springs that come on ALL of Tanabe's coilovers. I was running Tanabe Sustec Pro S-OC Type II coilovers, but they wouldn't go low enough so I bought shorter springs. I sold the coilovers with the original springs a couple months ago, so I need to get rid of these springs.
They will NOT fit stock shocks.
They will fit ANY coilover IF the inner diameter of the spring is 65mm.
The springs I have are:
Front:
10k spring rate
7in length (approx. 180mm)
65mm inner diameter
Rear:
8k spring rate
200mm length
65mm inner diameter
These springs were about 30mm shorter than the original springs, and I was able to go a good bit lower with them. I only had them on for about 5,000 miles and they were NOT on during the winter.
They retail for $100 per pair from Tanabe.
I want $120 + shipping/paypal for all four.
All Four
Fronts
http://i160.photobucket.com/albums/t...DSC_0060-1.jpg
http://i160.photobucket.com/albums/t...DSC_0061-1.jpg
http://i160.photobucket.com/albums/t...DSC_0062-1.jpg
http://i160.photobucket.com/albums/t...DSC_0064-1.jpg
Rears
http://i160.photobucket.com/albums/t...DSC_0065-1.jpg
http://i160.photobucket.com/albums/t...DSC_0066-1.jpg
http://i160.photobucket.com/albums/t...DSC_0067-1.jpg
http://i160.photobucket.com/albums/t...DSC_0068-1.jpg
Thread
Thread Starter
Forum
Replies
Last Post
bfor3
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
13
03-03-15 10:29 AM
SlowGS4
2Gen GS430 / 400/ 300 Classifieds (98-05)
14
11-12-12 12:57 AM
white_is
General Classifieds
2
04-08-10 07:12 PM
