Broken antenna on 93 ES300
01-21-04, 02:29 PM
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2003
Location: Massachusetts
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Broken antenna on 93 ES300
My antenna is stuck at full mast.
The motor still cranks like it tries to pull it back in. Do I need to replace the entire antenna or just the mast.
The motor still cranks like it tries to pull it back in. Do I need to replace the entire antenna or just the mast.
01-22-04, 03:28 PM
#2
Driver
Join Date: Nov 2003
Location: Louisiana
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
answer lies within http://carstereohelp.com/repairDoItY...mryPwrAntR.htm .
i think its common with es's. it happened to me and everytime i turn on the radio i hear this loud cranking sound becus the plasitc motor gears are shredded/broken. i just disconnected the motor (plastic blue/white clip) so my antenna just stays up all the time, and you can pull it up and down. i just leave mine about halfway up, it doesnt bother me.
i think its common with es's. it happened to me and everytime i turn on the radio i hear this loud cranking sound becus the plasitc motor gears are shredded/broken. i just disconnected the motor (plastic blue/white clip) so my antenna just stays up all the time, and you can pull it up and down. i just leave mine about halfway up, it doesnt bother me.
02-28-04, 10:12 AM
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2003
Location: Massachusetts
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all your help and the web link. It was the first day above 50 here so I decided I'd tackle this project. $61 for the OEM mast and 20 minutes later I was done. That includes taking the entire assembly apart to fish out the cable.
Thanks again
Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
rclab1
SC430 - 2nd Gen (2001-2010)
12
05-03-13 12:30 PM
