HELP, Please! Is this all I need to install an aftermarket H/U for my GS400?
#1
Lexus Test Driver
Thread Starter
Join Date: Jun 2001
Location: Maryland
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
HELP, Please! Is this all I need to install an aftermarket H/U for my GS400?
Okay, I thought I fixed my H/U's "muting of sound" by locating, unplugging, taping up the mobile phone wiring, but my H/U is back to no good. I even tried locating a diagram of the wiring of which I thought I was cutting the "MUTE" wire, but it wasn't what the diagram said and I taped it back. I'm out of all options.
Anyway, would this be all I need to have a successful aftermarket H/U install and still using my factory amp to power all the speakers:
1. Double DIN Kit
2. Amplifier Integration Harness
Would I need to add this 20-Pin Premium Radio Plug as well or do I need to rewire the whole car (I hope not!)?
I've talked with a few people via PM and have been told it's not THAT hard to hardwire the H/U either.
Just in case, I've got a 1998 GS400 with Nakamichi. Do we have the 20-PIN or 16-PIN in the Nakamichi system?
I'm looking to get something like this KENWOOD HEADUNIT.
All I want to do is switch out the H/U and leave everything else the same (I know I'm gonna lose the CD Changer, which is fine).
Thanks in advance, everyone!
Anyway, would this be all I need to have a successful aftermarket H/U install and still using my factory amp to power all the speakers:
1. Double DIN Kit
2. Amplifier Integration Harness
Would I need to add this 20-Pin Premium Radio Plug as well or do I need to rewire the whole car (I hope not!)?
I've talked with a few people via PM and have been told it's not THAT hard to hardwire the H/U either.
Just in case, I've got a 1998 GS400 with Nakamichi. Do we have the 20-PIN or 16-PIN in the Nakamichi system?
I'm looking to get something like this KENWOOD HEADUNIT.
All I want to do is switch out the H/U and leave everything else the same (I know I'm gonna lose the CD Changer, which is fine).
Thanks in advance, everyone!
Last edited by kevs; 11-28-04 at 07:22 PM.
#3
the 98 nakamichi cant use the toyota only amplifier integration kit or the 2002 or up 20 pin conncctor. it has 4 plugs on the back of it and is unlike any pioneer system gs car so advice from pioneer sysatem owners would be useless. there is a 6 and 10 pin speaker adapters similar to toyota but the power all comes from an 8 pin connctor .
Last edited by lexusaudio; 05-04-06 at 04:50 AM.
Thread
Thread Starter
Forum
Replies
Last Post
wwillmon
GS - 2nd Gen (1998-2005)
18
07-23-18 01:38 AM
pounkham
LX - 1st and 2nd Gen (1996-2007)
0
01-24-08 10:48 AM