TMaxxTim

Okay, I have a 92 SC 300 5spd and I want to install my DIY Rattler Remote Start System. I just want the keyless entry part to work since I have a 5spd and don't feel safe bypassing the clutch button and puttin in the remote start.

Now the site tells you the information but I lost the damn registration card and I can't get any of the wiring information.

So does anybody know what wires/what color/where they are located for this? I just want the parking lights to flash and the doors to lock/unlock.

I also need to know if the car is:
Positive-Triggered Relay System
Negative-Triggered Relay System
Multiplexed System
or Standard "5-wire" system

Any help on these fronts would be greatly appreciated. I got the complete thing for $20 so hopefully I can make it work, I don't really want to lay $100+ to have somebody install it!!

profuse007

| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white & white/red |+ |ign. harness |
| IGNITION|black/yellow |+ |ign. harness |
| POWER LOCK|green/yellow |- |pass. kick panel |
| POWER UNLOCK|green/white |- |pass. kick panel |
| PARKING LIGHTS +|dk. green | |wht. plug in dr. kick |
| DOOR TRIGGER|red/white |- |wht plug below fusebox |
| TRUNK/HATCH PIN|red/white/silver dot|- |dr. running board |
|TRNK/HTCH RELEASE|black/silver dot |+ |dr. running board |

TMaxxTim

Any idea on the location of the Lock and Unlock wires on the passenger panel? I can't find them AT ALL! I found some light green/white and light green/yellow wires (2 of them, one was thick and one was thin), and I cut them but neitehr of them worked the locks!!