SC3 Help please?
03-19-05, 05:26 AM
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2004
Location: International
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
SC3 Help please?
Help please!
I'm installing a Kenwood DDX-7035 headunit and a Kenwood KNA-3200 Navigation System in a 1992 SC300.
I need to know the colour and location of the following wires to connect to the system:
1) vehicle speed sensor,
2) park brake light sensor,
3) reverse light sensor,
4) brake light sensor.
Many thanks for your help.
Soto
I'm installing a Kenwood DDX-7035 headunit and a Kenwood KNA-3200 Navigation System in a 1992 SC300.
I need to know the colour and location of the following wires to connect to the system:
1) vehicle speed sensor,
2) park brake light sensor,
3) reverse light sensor,
4) brake light sensor.
Many thanks for your help.
Soto
03-19-05, 11:38 AM
#2
Driver School Candidate
Join Date: Jul 2004
Location: International
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
1, have a look at www.apexi.com and check out the wiring diagram for the RSM, that shows where to get the speed pulse at ECU
2, Just put it to an earth
3,Sorry cant remember, just check at the rear light plug then look along the door sill for the same wire
4, What do you need that for??
2, Just put it to an earth
3,Sorry cant remember, just check at the rear light plug then look along the door sill for the same wire
4, What do you need that for??
Thread
Thread Starter
Forum
Replies
Last Post
Maeve
LS - 1st and 2nd Gen (1990-2000)
2
01-16-03 04:09 PM
APU6speed
Lexus Audio, Video, Security & Electronics
3
07-15-02 09:43 AM