Need help ASAP > Installing HU w/ TOYO-01 Harness
12-08-06, 07:12 PM
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2006
Location: CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Need help ASAP > Installing HU w/ TOYO-01 Harness
Car: 2003 IS300
I purchased the amp integration harness today and started taking apart the factory HU. I'm getting power to the HU but not nearly enough sound. At the highest setting of the HU, it sounds like it would only be 1/8th of the true volume. From the new HU harness, I only was able to connect the 12v (red wire), I think Ignition (yellow wire) and amp turn on (blue). Those 3 wires were the only three from the I'm aiming to finish this tonight so if anyone has any experience with this harness and could help coach me over the phone or something, your help is unbelievably appreciated. PM me and i'll PM you my number. Thanks!!!
I purchased the amp integration harness today and started taking apart the factory HU. I'm getting power to the HU but not nearly enough sound. At the highest setting of the HU, it sounds like it would only be 1/8th of the true volume. From the new HU harness, I only was able to connect the 12v (red wire), I think Ignition (yellow wire) and amp turn on (blue). Those 3 wires were the only three from the I'm aiming to finish this tonight so if anyone has any experience with this harness and could help coach me over the phone or something, your help is unbelievably appreciated. PM me and i'll PM you my number. Thanks!!!
Thread
Thread Starter
Forum
Replies
Last Post
Erik347
Lexus Audio, Video, Security & Electronics
1
09-01-15 02:32 AM
