Subwoofer wiring HELP!
#16
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
and no, im not misunderstanding you.
the Nominal Impedance is what the amplifier needs to see.
his amp needs to see 4 ohm in a mono configuration (right positive, left negative) in order to put out its full power.
with two dual 4 ohm speakers, wired in series/parallel, or parallel/series, this is EXACTLY what he gets.
the Nominal Impedance is what the amplifier needs to see.
his amp needs to see 4 ohm in a mono configuration (right positive, left negative) in order to put out its full power.
with two dual 4 ohm speakers, wired in series/parallel, or parallel/series, this is EXACTLY what he gets.
#18
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://www.cardomain.com/shop/woofer...dvc&x=121&y=12
pretty much every single wiring diagram on the planet, tells you to wire his amp this way.
what are you trying to say man? everyone in the world but you is wrong?
pretty much every single wiring diagram on the planet, tells you to wire his amp this way.
what are you trying to say man? everyone in the world but you is wrong?
#22
Lead Lap
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
#24
Lexus Champion
iTrader: (6)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
gapxguy, your amp is not 1 ohm stable, you will blow it up if you hook it up like pic one.
i have a 500a2 and it has been hooked up like pic 2 for six to seven years,
i have not had any problems with it. 4ohms out speakers, 2ohms when bridged
88supramki was trying to tell you the same thing.
i have a 500a2 and it has been hooked up like pic 2 for six to seven years,
i have not had any problems with it. 4ohms out speakers, 2ohms when bridged
88supramki was trying to tell you the same thing.
Last edited by GS FONZy; 02-16-07 at 06:10 PM.
#25
Lead Lap
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Fonz, I recently changed my wiring from the first picture I posted (16 ohms
) to option 2 picture you posted above (4 ohms).
It looks like RF configured their 500a2 to rate @ 4 ohms when bridged in MONO. Therefore, it's gonna be 4 ohms from the amp and 4 ohms from the combined subs, am I right? Is this the match we're looking for?
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
It looks like RF configured their 500a2 to rate @ 4 ohms when bridged in MONO. Therefore, it's gonna be 4 ohms from the amp and 4 ohms from the combined subs, am I right? Is this the match we're looking for?
Thread
Thread Starter
Forum
Replies
Last Post
2Fast0
IS - 2nd Gen (2006-2013)
8
04-28-06 09:26 PM
joshoowa
Lexus Audio, Video, Security & Electronics
8
10-04-05 10:19 AM