How To: Build and Hardwire an Auxillary Input to OEM Stereo
#693
#696
possibly but the ECT switch (in the LS at least) isn't an SPST, it's a SPDT or SPCO switch.
if it has >2 positions, it won't work. (ECT in the LS is PWR, OFF, SNOW, so it won't work)
if it has >2 positions, it won't work. (ECT in the LS is PWR, OFF, SNOW, so it won't work)
#697
98 GS400 with Nak (no nav)
I have a 98 GS400 with Nak (no nav) and I'm just not seeing the pin outs that people are describing. I have a 12 pin on the glove 6 disk changer (first pic), but no white, black, green, red in pins 9,10,11,12. And there is no 12 pin connector on the head unit (biggest are 2 -10 pins) [second pic]. Am I missing something here?
#698
@Rescued - just follow the harness(in ur first pic) to a silver box to the right of the cd changer. Then follow the output harness of the silver box to a male female connector in front of the box. That connector has the black, white, red, and green wires that you need to connect to. You can splice to either side of the connectors. I have a 98 GS 400 and I ran into the same problem thinking that I need to hook up to the harness coming out of the cd changer. Just pm me if you have more questions.
#700
Hey!
I have 1993 SC400 with Nakamichi headunit, 12cd changer and stock amp in trunk!
Can anyone can tell me which wires should I use to make this work?
I've read to page 14 and didn't found anything and google doesn't have anything too!
Could someone help? As I've already bought all necessary parts to do this
I have 1993 SC400 with Nakamichi headunit, 12cd changer and stock amp in trunk!
Can anyone can tell me which wires should I use to make this work?
I've read to page 14 and didn't found anything and google doesn't have anything too!
Could someone help? As I've already bought all necessary parts to do this
Last edited by S14DST; 06-26-12 at 12:58 PM.
#701
Hey!
I have 1993 SC400 with Nakamichi headunit, 12cd changer and stock amp in trunk!
Can anyone can tell me which wires should I use to make this work?
I've read to page 14 and didn't found anything and google doesn't have anything too!
Could someone help? As I've already bought all necessary parts to do this
I have 1993 SC400 with Nakamichi headunit, 12cd changer and stock amp in trunk!
Can anyone can tell me which wires should I use to make this work?
I've read to page 14 and didn't found anything and google doesn't have anything too!
Could someone help? As I've already bought all necessary parts to do this
Black R+
Blue L+
White R-
Red L-
Everything works fine, except I think signal is going straight to head without amplifier, as I have very quiet sound and absolutely no bass!
Could someone tell me how to wire correctly?
I used this diagram http://www.lextreme.com/Lexradiowcd.pdf
#702
I found that someone used
Black R+
Blue L+
White R-
Red L-
Everything works fine, except I think signal is going straight to head without amplifier, as I have very quiet sound and absolutely no bass!
Could someone tell me how to wire correctly?
I used this diagram http://www.lextreme.com/Lexradiowcd.pdf
Black R+
Blue L+
White R-
Red L-
Everything works fine, except I think signal is going straight to head without amplifier, as I have very quiet sound and absolutely no bass!
Could someone tell me how to wire correctly?
I used this diagram http://www.lextreme.com/Lexradiowcd.pdf
Nobody had this kind of issue?
Maybe head unit should be turned all the way up or something else that I'm missing?
As all the wires are correct i.e the same color and connector
#704
Maybe sound was a tiny bit louder, but still very quiet and tiny amount of bass, compared to what my cd changer gives out... I just don't get why it doesn't works for me... maybe my laptop had to have volume turned up to 100% or something like that?
But when I had relays connected I tried with my iPod and even with max volume it was very quiet and minimum bass
At the moment I'm using cd's but I actually hate them