TsunamiG0d

SoCal LA county PK

Hmmmm cool thanks lexusaudio I'll start looking

PK_Celsior

iTrader: (18)

aww if you were a little closer i would go check it out fo ya. but i live all the way in socal sd

TsunamiG0d

lol dam i see, thanks anyways

scooter58

iTrader: (2)

pull out ur speaker.. and use ur multi meter and use the Ohm setting.

and check if your speaker is reading 2. ohms for the fronts.
4. ohms for the rear.

if it doesn't read those numbers than it's ur speakers for sure.
the symbol looks like a horseshoe.

sounds like ur speakers are blown.

TsunamiG0d

thanks scooter I'll try that

scooter58

iTrader: (2)

wat does it read out?

TsunamiG0d

Hey scooter, I haven't had time to test it but will today. Do I just read the 2 wires that plug into the speaker or is there wires under that will require me to take the speaker out? thanks again

scooter58

iTrader: (2)

yeah just the 2 wires that plug into the plastic baffle. u don't have to pull out the speaker. make sure it's the wires to the tweeter tho.

TsunamiG0d

So I tested it and and the bottom front speaker was at about 20 and the top front was 5 idk what that means, but thats what the numbers where.