SC speakers
04-22-09, 11:24 AM
#17
Lead Lap
Join Date: Jun 2006
Location: GA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
1" tweeters.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
04-23-09, 01:12 AM
#18
Pole Position
Join Date: Dec 2007
Location: CA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
1" tweeters.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
04-23-09, 08:55 AM
#19
Lexus Test Driver
1" tweeters.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
I used a set of 6.5 infinity kappa perfects components up front and 5.25" kappa coaxials in the rear with a 10" Infinity Kappa DVC sub that is custom mounted using MDF rings to give me clearance above the gas tank.
I had to make MDF covers for the stock baffles so they could be mounted into the stock locations. Tweeters went in without a fuss. For the rear, I had to modify the stock mounting baffles to accept a 5.25" speaker. The subwoofer took some doing, but a sub in the trunk sucks *** due to the gas tank being in the way.
06-10-09, 04:38 PM
#20
Lead Lap
Join Date: May 2009
Location: North C
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
I also replaced all speakers with kickers. 4" front and rear, but put 1 1/2" tweeters on the doors and 6 x 9s in the rear between the side speakers and center sub. The system causes hearing damage now!
Thread
Thread Starter
Forum
Replies
Last Post
Big Pookie
Lexus Audio, Video, Security & Electronics
2
07-13-04 10:03 PM
icgraven
Lexus Audio, Video, Security & Electronics
1
04-10-04 02:08 PM
dbullen
Lexus Audio, Video, Security & Electronics
2
08-27-03 11:06 AM
