1997 Lexus HU Upgrade Antenna Problem
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2010
Location: MA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1997 Lexus HU Upgrade Antenna Problem
1997 LS400 without Nak new HU with factory amp
Has anyone got their antenna to work properly? I wired the Black/Red wire from the C12 (Ant+) and it will go up but it stops at 30” (the FM band height). I am getting poor reception for AM. I believe this may be the problem.
Since my new HU (Pioneer P5200HD) does not have separate leads for FM and AM antenna, I am guessing that I will have to choose one height. I want to try it on the fully extended setting before I make a decision.
Does anyone know the purpose of leads C4 (Ant A) and C13 (Ant B)? I’d like to know if there is another solution before I try connecting the Power Antenna lead from the HU to each of them to see what happens.
Thanks
Has anyone got their antenna to work properly? I wired the Black/Red wire from the C12 (Ant+) and it will go up but it stops at 30” (the FM band height). I am getting poor reception for AM. I believe this may be the problem.
Since my new HU (Pioneer P5200HD) does not have separate leads for FM and AM antenna, I am guessing that I will have to choose one height. I want to try it on the fully extended setting before I make a decision.
Does anyone know the purpose of leads C4 (Ant A) and C13 (Ant B)? I’d like to know if there is another solution before I try connecting the Power Antenna lead from the HU to each of them to see what happens.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
SpencerT
LS - 1st and 2nd Gen (1990-2000)
13
03-24-12 07:59 AM
Kyle Harty
ES - 1st to 4th Gen (1990-2006)
12
06-05-03 11:23 AM