Want to trade: My Talon for SC300 5 speed
06-25-05, 01:06 AM
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2005
Location: Nebraska
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Want to trade: My Talon for SC300 5 speed
Just seeing if anyone would be interested......
Car is white with tan interior....white stock wheels with new Nitto 450s
The motor is built....it has the following JE Pistons,Eagle Rods,Balanced Shafts removed,New timing belt and tensior,HKS Cam Gears,Poly mounts,the head has dual springs, titanium retainers,stainless steel valves,5 angle valve job,It has been ported and polished,also has 264/272 cams in it. The exhaust is Apexi down with Apexi cat back, also has 14b with an upper intercooler pipe with HKS Bov. The car has auto meter boost and Exhaust gas temp.,and it does have a Apexi AFC in it.
Tranny has no grinds in it.....Has a 2600lb ACT clutch with Fidanza Flywheel.
*Not installed yet*
Also have Aeromotive 1000 fuel pump,Aeromotive fuel pressure Reg,Aeromotive fuel Rail,10 Gal fuel cell,-8 feed and -6 return.
I do have pics.....
Car is white with tan interior....white stock wheels with new Nitto 450s
The motor is built....it has the following JE Pistons,Eagle Rods,Balanced Shafts removed,New timing belt and tensior,HKS Cam Gears,Poly mounts,the head has dual springs, titanium retainers,stainless steel valves,5 angle valve job,It has been ported and polished,also has 264/272 cams in it. The exhaust is Apexi down with Apexi cat back, also has 14b with an upper intercooler pipe with HKS Bov. The car has auto meter boost and Exhaust gas temp.,and it does have a Apexi AFC in it.
Tranny has no grinds in it.....Has a 2600lb ACT clutch with Fidanza Flywheel.
*Not installed yet*
Also have Aeromotive 1000 fuel pump,Aeromotive fuel pressure Reg,Aeromotive fuel Rail,10 Gal fuel cell,-8 feed and -6 return.
I do have pics.....
06-26-05, 04:23 PM
#2
Lexus Test Driver
iTrader: (1)
Join Date: Nov 2004
Location: MN
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by whitelazer
Just seeing if anyone would be interested......
Car is white with tan interior....white stock wheels with new Nitto 450s
The motor is built....it has the following JE Pistons,Eagle Rods,Balanced Shafts removed,New timing belt and tensior,HKS Cam Gears,Poly mounts,the head has dual springs, titanium retainers,stainless steel valves,5 angle valve job,It has been ported and polished,also has 264/272 cams in it. The exhaust is Apexi down with Apexi cat back, also has 14b with an upper intercooler pipe with HKS Bov. The car has auto meter boost and Exhaust gas temp.,and it does have a Apexi AFC in it.
Tranny has no grinds in it.....Has a 2600lb ACT clutch with Fidanza Flywheel.
*Not installed yet*
Also have Aeromotive 1000 fuel pump,Aeromotive fuel pressure Reg,Aeromotive fuel Rail,10 Gal fuel cell,-8 feed and -6 return.
I do have pics.....
Car is white with tan interior....white stock wheels with new Nitto 450s
The motor is built....it has the following JE Pistons,Eagle Rods,Balanced Shafts removed,New timing belt and tensior,HKS Cam Gears,Poly mounts,the head has dual springs, titanium retainers,stainless steel valves,5 angle valve job,It has been ported and polished,also has 264/272 cams in it. The exhaust is Apexi down with Apexi cat back, also has 14b with an upper intercooler pipe with HKS Bov. The car has auto meter boost and Exhaust gas temp.,and it does have a Apexi AFC in it.
Tranny has no grinds in it.....Has a 2600lb ACT clutch with Fidanza Flywheel.
*Not installed yet*
Also have Aeromotive 1000 fuel pump,Aeromotive fuel pressure Reg,Aeromotive fuel Rail,10 Gal fuel cell,-8 feed and -6 return.
I do have pics.....
Is it awd? Is it a 2.0 or 2.4L? year? 6 bolt/7bolt? If I was to trade, it'd have to be + cash on your end. My SC300 is pearl white w/ 18x9(F) 18x10(R) with Tein HRs and 93k on it.
06-26-05, 05:10 PM
#3
Pole Position
Join Date: Apr 2005
Location: PA
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by guessd
Is it awd? Is it a 2.0 or 2.4L? year? 6 bolt/7bolt? If I was to trade, it'd have to be + cash on your end. My SC300 is pearl white w/ 18x9(F) 18x10(R) with Tein HRs and 93k on it.
Good luck with the trade whitelazer....the car sounds nice...
06-26-05, 11:09 PM
#4
Driver School Candidate
Thread Starter
Join Date: Jun 2005
Location: Nebraska
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
yes the car is AWD and it is a built 7 bolt i do have pics if you are interested....the car only has 70,000 miles on to forgot to metion that....let me know what ya think.....maybe we can work something out..
no its not me ( turbospooins)......iam whitelazer1 on there as well........
not listed on my first post
I do have an AEM with 3 bar map sensor and air intake sensor....*Brand new still in the box*
no its not me ( turbospooins)......iam whitelazer1 on there as well........
not listed on my first post
I do have an AEM with 3 bar map sensor and air intake sensor....*Brand new still in the box*
Last edited by whitelazer; 06-26-05 at 11:14 PM.
06-27-05, 12:57 AM
#5
Lexus Test Driver
iTrader: (1)
Join Date: Nov 2004
Location: MN
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by QuikLex
Ahhh...a few more fellow DSMers.... guessd...are you "TurboSpoolinIns " from tuners?
Good luck with the trade whitelazer....the car sounds nice...
Good luck with the trade whitelazer....the car sounds nice...
Eh, Thanks for the more info, but I woulda maybe considered it if it was a 6 bolt 2.0 though I will do a 2.4 6 bolt again anyhow.
Yes, I'm TurboSpoolinIns on tooners.
Thread
Thread Starter
Forum
Replies
Last Post
SexySXEgrl
Lexus Vehicles Classifieds
11
12-26-06 07:52 AM
