1995 SC300 CUSTOM Barcelona Red Paint 97 + Upgrade ETC
03-26-08, 08:11 PM
#32
Lead Lap
Thread Starter
Join Date: Feb 2003
Location: Florida
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
There was some VERY light damage to the front fender and the bottom of the driver door. Both the door and fender were replaced and NO BONDO was used. Pictures of the damage are available. Car is still awaiting a new happy owner.
03-28-08, 01:54 AM
#33
Lead Lap
Thread Starter
Join Date: Feb 2003
Location: Florida
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
Pics of the damage before repair:
Again, the door and fender were replaced, quarter sustained no damage, all panels line up perfectly. No significant damage to front or rear bumper (although from bumper was missing all support brackets were in place undamaged) and airbags were not deployed.
Again, the door and fender were replaced, quarter sustained no damage, all panels line up perfectly. No significant damage to front or rear bumper (although from bumper was missing all support brackets were in place undamaged) and airbags were not deployed.
03-29-08, 08:15 PM
#34
Lead Lap
Thread Starter
Join Date: Feb 2003
Location: Florida
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
03-30-08, 03:23 PM
#35
Lead Lap
Thread Starter
Join Date: Feb 2003
Location: Florida
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
Revving:
http://videos.streetfire.net/video/m...pen_155748.htm
Dont mind the cel and trac warning lights on, i have the shifter bezel unplugged to install the new shift ****.
http://videos.streetfire.net/video/m...pen_155748.htm
Dont mind the cel and trac warning lights on, i have the shifter bezel unplugged to install the new shift ****.
04-02-08, 05:24 AM
#38
Lead Lap
Thread Starter
Join Date: Feb 2003
Location: Florida
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
I dont doubt it, if it doesnt sell pretty soon i'll probably take a weekend and do it myself. I'm hoping people realize that a 1jz swap is pie and they can do it themselves.
