FS: 1993 lexus SC300 Turbo
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
FS: 1993 lexus SC300 Turbo
ok im trying to sell my 93 sc300 mainly because cant afford to drive it anymore between tickets and gas. i bought the car at beginning of summer and has yet to give me any problems except for battery. its gotten an oil change every 3000 with mobil 1 fully synthetic. motor was replaced and had about 75k on it. no grinds or slipping in clutch at all. here is list of mods on car.
ARP Headstuds
Resurfaced head
Boost Logic 2.5mm Headgasket
67 trim turbo
Full Race Turbo Manifold
First State Motorsport Downpipe
Blitz Dual SBC Boost Controller
External Wastegate
HKS VPC/APEXi SAFC tuning combo (the VPC simulates a MAP sensor to get rid of the MAF)
Competition Stage 5 Drag Clutch
full Coilovers
Supra TT Front brake upgrade
Supra TT Front and Rear Swaybars
Sportmax 962 Wheels
Autometer Boost Gauge
AEM UEGO Wideband
newer radiator
newer water pump
newer rear wheel bearings
newer gaskets (complete head portion of motor ie. intake manifold/exhaust manifold)
NEW lower left control arm with about 50 miles on it
The bad:
No A/C..not sure what exactly wrong, a previous owner hit a guard rail or something because it has some scrapes on rear right quarter panel, the needle on gauges is burnt out, climate control as a little bleeding but everthing works great, could use new right lower control arm because bushings are not the best.
I am asking 7600 OBO...also interested in trades just let me know what you got. thanks...am going to try and get more pics of car this is all i have on my computer i just need to find a camera since mine is broke. let me know if any certain pics you'd like to see. i will def get pic of scrape down passenger quarter.
ARP Headstuds
Resurfaced head
Boost Logic 2.5mm Headgasket
67 trim turbo
Full Race Turbo Manifold
First State Motorsport Downpipe
Blitz Dual SBC Boost Controller
External Wastegate
HKS VPC/APEXi SAFC tuning combo (the VPC simulates a MAP sensor to get rid of the MAF)
Competition Stage 5 Drag Clutch
full Coilovers
Supra TT Front brake upgrade
Supra TT Front and Rear Swaybars
Sportmax 962 Wheels
Autometer Boost Gauge
AEM UEGO Wideband
newer radiator
newer water pump
newer rear wheel bearings
newer gaskets (complete head portion of motor ie. intake manifold/exhaust manifold)
NEW lower left control arm with about 50 miles on it
The bad:
No A/C..not sure what exactly wrong, a previous owner hit a guard rail or something because it has some scrapes on rear right quarter panel, the needle on gauges is burnt out, climate control as a little bleeding but everthing works great, could use new right lower control arm because bushings are not the best.
I am asking 7600 OBO...also interested in trades just let me know what you got. thanks...am going to try and get more pics of car this is all i have on my computer i just need to find a camera since mine is broke. let me know if any certain pics you'd like to see. i will def get pic of scrape down passenger quarter.
Last edited by SC300boost; 03-15-09 at 07:20 PM.
#5
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
sorry forgot to say that in original posting...the chasis has 223,xxx on it, Precision 525cc injectors, Walbro 255lph fuel pump, spearco FMIC, was previously tuned at local shop beeyond engineering...any more questions let me know thanks for your interest.
Trending Topics
#9
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
on 10 lbs it dynoed at about 305 rwhp and about 300 ft/lbs...car can easily handle more boost obviousily...and has yet been taking to track because it will prob need some slicks or drag radials. my zip code is 53154
#11
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
hey guys this thing is up for sale again. just got done doing timing belt, water pump, front crankshaft seal, cam seals, all new hose techniques intercooler couplers w/ t clamps all around (bye bye boost leaks!!), valve cover gasket, all intake makifold gaskets and throttle body gasket, have a new ACT 6 puck clutch with torque capacity of 468 ft lbs. on its way now and will be installed along with resurfaced flywheel, 8000k HIDs, new plugs and wires. i am pretty interested in trades as of now so let me know what ya got. i just stuck alot of money into this car and will need nothing at all to be a extremely fast daily driver. i have never had 1 major problem with it and i have owned it for almost 2 years.
#12
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Wisconsin
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
all the work is being finished up right now..these however are my only current enginebay pics sorry. its all going to be done this week though
Last edited by SC300boost; 03-13-09 at 06:33 PM.