FS: 92 SC300 NA-T w/ Ebay FFM & TB
#1
FS: 92 SC300 NA-T w/ Ebay FFM & TB
Well, I have decided not to continue further with the car and it is now up for sale. It is a 93 Silver spruce exterior with grey leather interior. The car was involved in a fender bender before I owned the car and however it has a clean NYS Title. My loss is your gain!
To the goods:
Installed Mods:
-Megan coilovers
-Megan outter tie rods
-Supra TT wheels with 90% tread all around
-LS400 BBK
-XSPower T61 Turbo Kit (downpipe has thermal wrap)
-Ebay Forward Facing Manifold w/ 80mm Throttle Body
-50MM BOV
-50MM Open wastegate
Uninstalled Mods:
-TT sways with new Poly mounts (no subframe mounts available)
-5spd swap will come with the car as well as 5spd ECU (all you will need is a shift ****)
The slave cylinder and master cylinder are BNIB from the dealer.
-TT headgasket
-Gasket Kit (which includes rear main, front main etc. The injector seals have already been replaced.)
Exterior is about a 7.5/10 with the interior being a 6.5/10.
The bad:
-Windshield will need to be replaced due to it having a crack.
-Sunroof glass has a crack however DOES NOT leak.
Considering what I paid for the car, turbo kit, FFM w/ TB and all the other goodies installed and coming with the car, I feel my asking price of $6500 is very fair.
Pics will be up shortly.
Thanks for your interest.
I realize I do not have a high post count but I hope the following vouches can assist me in allowing this thread to stay open.
Tavarish, Rising_Sun, Curry, Brownmagic, Blklegend, TANE, Product_SC.
Jae...
The car is running on stock fuel and it runs. The MAF, to avoid stalling, has been placed on the TB side.
To the goods:
Installed Mods:
-Megan coilovers
-Megan outter tie rods
-Supra TT wheels with 90% tread all around
-LS400 BBK
-XSPower T61 Turbo Kit (downpipe has thermal wrap)
-Ebay Forward Facing Manifold w/ 80mm Throttle Body
-50MM BOV
-50MM Open wastegate
Uninstalled Mods:
-TT sways with new Poly mounts (no subframe mounts available)
-5spd swap will come with the car as well as 5spd ECU (all you will need is a shift ****)
The slave cylinder and master cylinder are BNIB from the dealer.
-TT headgasket
-Gasket Kit (which includes rear main, front main etc. The injector seals have already been replaced.)
Exterior is about a 7.5/10 with the interior being a 6.5/10.
The bad:
-Windshield will need to be replaced due to it having a crack.
-Sunroof glass has a crack however DOES NOT leak.
Considering what I paid for the car, turbo kit, FFM w/ TB and all the other goodies installed and coming with the car, I feel my asking price of $6500 is very fair.
Pics will be up shortly.
Thanks for your interest.
I realize I do not have a high post count but I hope the following vouches can assist me in allowing this thread to stay open.
Tavarish, Rising_Sun, Curry, Brownmagic, Blklegend, TANE, Product_SC.
Jae...
The car is running on stock fuel and it runs. The MAF, to avoid stalling, has been placed on the TB side.
Last edited by Luv2xl; 12-18-08 at 10:49 AM.
Thread
Thread Starter
Forum
Replies
Last Post