CA 1992 SC300 5 speed Pearl White/tan int in Nor-Cal
05-23-09, 02:22 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: San Jose, CA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
1992 SC300 5 speed Pearl White/tan int in Nor-Cal
First of all most people like to know:
Clean title
217k miles
It is in excellent running condition.
engine runs smooth, no vibration inside the car.
clutch in good condition not sure how old, previous owner told me not long ago.
17" alloy with almost new tires at front, 70% rear.
bad:
driver seat has rips on the rib side from getting in-out of the car.
driver side quarter panel close to taillight have dent, but already pulled out and primered, but not painted.
speedo needle doesn't light up.
rpm needle light flicking.
$3500 without rims
$3900 with rims
Prefer local sales, never ship a car before.
I don't have so many pictures.
Clean title
217k miles
It is in excellent running condition.
engine runs smooth, no vibration inside the car.
clutch in good condition not sure how old, previous owner told me not long ago.
17" alloy with almost new tires at front, 70% rear.
bad:
driver seat has rips on the rib side from getting in-out of the car.
driver side quarter panel close to taillight have dent, but already pulled out and primered, but not painted.
speedo needle doesn't light up.
rpm needle light flicking.
$3500 without rims
$3900 with rims
Prefer local sales, never ship a car before.
I don't have so many pictures.
Last edited by arrocy; 05-29-09 at 12:22 AM.
05-29-09, 07:21 PM
#6
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: San Jose, CA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
The rear panel is not really that bad.
panel pulled out, very thin layer of bondo and primer just to prevent rusting.
The car is in storage right now.
I will go there tonight to see if I can get a good pictures of the dent.
No other internal damage.
panel pulled out, very thin layer of bondo and primer just to prevent rusting.
The car is in storage right now.
I will go there tonight to see if I can get a good pictures of the dent.
No other internal damage.
Trending Topics
05-31-09, 01:06 AM
#9
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: San Jose, CA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I didn't put ad on eBay, and yes I replies to forum and pm's late at night, that's because I got home from work at around midnight.
This car suppose to be my project car.
I was planning to repaint the rear panel, lower the car, and take most of the interior off, but
plan changed, my boss decided to give me back my full time schedule 6 days a week.
I don't have any time to take care of the car now.
This car suppose to be my project car.
I was planning to repaint the rear panel, lower the car, and take most of the interior off, but
plan changed, my boss decided to give me back my full time schedule 6 days a week.
I don't have any time to take care of the car now.
06-01-09, 11:45 PM
#10
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: San Jose, CA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Nobody?????
Willing to let go for $3500 with the rims.
I forgot to mention that the windshield has a little crack and the trunk lift support can not support the trunk, need to be replaced.
Willing to let go for $3500 with the rims.
I forgot to mention that the windshield has a little crack and the trunk lift support can not support the trunk, need to be replaced.
Thread
Thread Starter
Forum
Replies
Last Post
