CA Turbo 1994 GS300 2700$
#1
Pole Position
Thread Starter
Turbo 1994 GS300 2700$
Fahad Khan
626-383-9555
Located in socal
Willing to ship if your willing to pay
Email me at : Spartankhan@gmail.com
1800$
I just need this off my driveway , and Some money to mod my new car
CLEAN TITLE
Replace the headgasket and MAF and you have a ~300 crank hp car. Car is ready for 9psi 300bhp
Hey guys , Im selling a black lexus 1994 gs300 with a turbo kit on it, has around 170k-180k miles, All belts, sparkplug wires and sparkplugs have been replaced. Its currently Boosting at 5 psi.
This car is not operational until the headgasket is changed and the Mass airflow sensor is changed I was going to do it myself, but im leaving the jdm motor scene and trying out the euro's.
Heres some info on the car
Turbo Kit
2JZ-GE XSpower Manifold (Black)
T61 XS Power turbo (less than 300 miles)
HKS Style Wastegate (5 psi spring)
Apexi SAFC 2 (Fuel controller)
AEM UEGO Air/fuel ratio guage
"JDM" Turbo boost Guage
XS Power Downpipe
Porsche Bypass valve (Permanently attached to a 2.5 pipe)
Type-S Blow off valve ( pipe and gasket included)
OIL feed line bolt (Screws directly into 2jzge)
Oil Drain and Feed line flanges
mushroom air filer with MAF Flange.
Supra Sidemount Intercooler
Heavy Duty Transmission Cooler
Assortment of Piping, Couplers, Fuel feed line, drain line
1994 GS300
Recently repainted onxy black (rear bumber and trunk needs repainting though)
Stock Aristo wheels, Falken Ziex 512's ( Over 70% tread on all of em)
Lowered on Tanabes
Catless stock exhuast with some 3 inch piping right after manifold flange
Sun roof
Red bulbs in the odometer, every gauge works and needles lighted
Tan Leather Seats (has rips in the front seats) back seats just have cracks
Speakers really weak
Heater Works, Air evaporator damaged , so no cold air, However i have the replacement one , you just need to put it in.
Pictures.
Some more pics http://s892.photobucket.com/albums/a...tankhan/Gs300/
626-383-9555
Located in socal
Willing to ship if your willing to pay
Email me at : Spartankhan@gmail.com
1800$
I just need this off my driveway , and Some money to mod my new car
CLEAN TITLE
Replace the headgasket and MAF and you have a ~300 crank hp car. Car is ready for 9psi 300bhp
Hey guys , Im selling a black lexus 1994 gs300 with a turbo kit on it, has around 170k-180k miles, All belts, sparkplug wires and sparkplugs have been replaced. Its currently Boosting at 5 psi.
This car is not operational until the headgasket is changed and the Mass airflow sensor is changed I was going to do it myself, but im leaving the jdm motor scene and trying out the euro's.
Heres some info on the car
Turbo Kit
2JZ-GE XSpower Manifold (Black)
T61 XS Power turbo (less than 300 miles)
HKS Style Wastegate (5 psi spring)
Apexi SAFC 2 (Fuel controller)
AEM UEGO Air/fuel ratio guage
"JDM" Turbo boost Guage
XS Power Downpipe
Porsche Bypass valve (Permanently attached to a 2.5 pipe)
Type-S Blow off valve ( pipe and gasket included)
OIL feed line bolt (Screws directly into 2jzge)
Oil Drain and Feed line flanges
mushroom air filer with MAF Flange.
Supra Sidemount Intercooler
Heavy Duty Transmission Cooler
Assortment of Piping, Couplers, Fuel feed line, drain line
1994 GS300
Recently repainted onxy black (rear bumber and trunk needs repainting though)
Stock Aristo wheels, Falken Ziex 512's ( Over 70% tread on all of em)
Lowered on Tanabes
Catless stock exhuast with some 3 inch piping right after manifold flange
Sun roof
Red bulbs in the odometer, every gauge works and needles lighted
Tan Leather Seats (has rips in the front seats) back seats just have cracks
Speakers really weak
Heater Works, Air evaporator damaged , so no cold air, However i have the replacement one , you just need to put it in.
Pictures.
Some more pics http://s892.photobucket.com/albums/a...tankhan/Gs300/
Last edited by vindedreal; 01-18-10 at 05:31 PM.
Trending Topics
#8
Forum Administrator
iTrader: (2)
Guys take all the OT / back and forth to PM please