MD FS 92 SC300 5spd $2200 OBO
#37
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I txted u saying that I dealt with "Honest Auto Movers" to bring my m3 from Chicago down to FL...I emailed them this morning to get a quote and I'll get back to u when they respond.
#42
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I can tell you what the trans issue is and how to fix it with a $15 pair of tin snips. Did you cut your auto tunnel? If not, the hole the shifter comes through is too small. I can dig through my old build thread and find you a pic of it cut if you want me to. It's easier than modifying the shifter itself, albeit noisy when driving.
Last edited by hyjaxx; 05-05-11 at 01:10 PM.
#43
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I can tell you what the trans issue is and how to fix it with a $15 pair of tin snips. Did you cut your auto tunnel? If not, the hole the shifter comes through is too small. I can dig through my old build thread and find you a pic of it cut if you want me to. It's easier than modifying the shifter itself, albeit noisy when driving.
#44
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It's just removing the console and cutting 3 inches towards the engine bay. I'll hunt down a pic in case you change your mind.
Couldn't find a pic of the hole but there's one of the plate the I put over the top (I went th400) here http://https://www.clublexus.com/for...300nat-12.html
You can get the idea from the scope of the plate how much cutting you have to do.
Couldn't find a pic of the hole but there's one of the plate the I put over the top (I went th400) here http://https://www.clublexus.com/for...300nat-12.html
You can get the idea from the scope of the plate how much cutting you have to do.
Last edited by hyjaxx; 05-05-11 at 01:34 PM. Reason: Adding link.