AZ 93 SC300 1jz \ Soarer R154
03-16-11, 02:37 PM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
93 SC300 1jz \ Soarer R154
I bought the SC300 at auction with a pushed up hood, broken core support and radiator "looked like it went under a trailer at around 10 mph". I replaced the core support, hood, front facia from a Soarer front clip. The chassis has 155K miles on it (motor was 100,000KM). I've recently replaced the rear trunk lid as the original had a small push in dent, and have a new black hood to replace the green one from the soarer front clip.
I have the title in hand as a Indiana title. I haven't registered the car under my name, but it is signed over to me and I have the bill of sale. Starts right up, pulls strong through each gear.
I've been running the car in my garage every other week and running it to full temp to keep it from sitting too long.
The car has been sitting since I've moved from FL to AZ, and I want it out of the garage. Looking for a quick sale at $5600, would prefer local in Phoenix area but will ship at buyers expense. The 1jz\r154, and performance parts alone are worth more than the $5600 easy if you would part it out.
Bad:
Paint \ small body fills (dent's dings, nothing major)
Suspension is original stock, no issues just soft.
Passanger window guide needs to be replaced (have working used guide I bought off CL that comes with the car)
rear trunk struts don't hold up the lid
New Parking brake cable (stock one is stretched)
Front seats show thier age, but don't have any major hole or anything
New dash trim piece that covers key hole comes with the car, as the current one is broken.
Tires have good tread, but have flat spots from sitting. (rough ride)
What the car has done to it now:
Soarer 1JZ swaped motor and R154 transmission
Spec stage 3+ clutch
680CC injectors and billet rail
Dual walboro 255pumps with -6 fuel lines into Aeromotive FPR and inline filter
ITS 66 DBB turbo T4 divided hosuing
T4 tubular divided header
40mm Wastegate dumped
Custom 3" to 4" exhuast
Greddy 3 row FMIC and 2.5" in to 3" out IC pipes and Tial BoV
SAFC II
Soarer ECU
ball and spring MBC
AFX Wideband
18X8.5 5-114 ET39 SHUK BS1 245/40ZR18 Pirelli PZero Nero Front
18X9.5 5-114 ET42 SHUK BS1 265/40ZR18 Pirelli PZero Nero Rear
Comes with a 2nd stock black hood I purchased. (Soarer hood is on it now which is dark green)
comes with a Greddy SpecII boost controller that the Solinoid stoped working. Its still hooked up to read pressure as a boost guage in the glove box.
Also have other misc sc300 parts and duplicate pieces, all will be going with the car unless you don't want them.
Feel free to PM me with any questions. I will get some pics up tonight or tomorrow.
I have the title in hand as a Indiana title. I haven't registered the car under my name, but it is signed over to me and I have the bill of sale. Starts right up, pulls strong through each gear.
I've been running the car in my garage every other week and running it to full temp to keep it from sitting too long.
The car has been sitting since I've moved from FL to AZ, and I want it out of the garage. Looking for a quick sale at $5600, would prefer local in Phoenix area but will ship at buyers expense. The 1jz\r154, and performance parts alone are worth more than the $5600 easy if you would part it out.
Bad:
Paint \ small body fills (dent's dings, nothing major)
Suspension is original stock, no issues just soft.
Passanger window guide needs to be replaced (have working used guide I bought off CL that comes with the car)
rear trunk struts don't hold up the lid
New Parking brake cable (stock one is stretched)
Front seats show thier age, but don't have any major hole or anything
New dash trim piece that covers key hole comes with the car, as the current one is broken.
Tires have good tread, but have flat spots from sitting. (rough ride)
What the car has done to it now:
Soarer 1JZ swaped motor and R154 transmission
Spec stage 3+ clutch
680CC injectors and billet rail
Dual walboro 255pumps with -6 fuel lines into Aeromotive FPR and inline filter
ITS 66 DBB turbo T4 divided hosuing
T4 tubular divided header
40mm Wastegate dumped
Custom 3" to 4" exhuast
Greddy 3 row FMIC and 2.5" in to 3" out IC pipes and Tial BoV
SAFC II
Soarer ECU
ball and spring MBC
AFX Wideband
18X8.5 5-114 ET39 SHUK BS1 245/40ZR18 Pirelli PZero Nero Front
18X9.5 5-114 ET42 SHUK BS1 265/40ZR18 Pirelli PZero Nero Rear
Comes with a 2nd stock black hood I purchased. (Soarer hood is on it now which is dark green)
comes with a Greddy SpecII boost controller that the Solinoid stoped working. Its still hooked up to read pressure as a boost guage in the glove box.
Also have other misc sc300 parts and duplicate pieces, all will be going with the car unless you don't want them.
Feel free to PM me with any questions. I will get some pics up tonight or tomorrow.
Last edited by cosmo; 03-23-11 at 07:40 AM.
03-17-11, 12:35 PM
#4
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
03-23-11, 10:27 AM
#12
Driver School Candidate
Thread Starter
Join Date: Nov 2005
Location: AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
04-10-11, 03:22 PM
#14
Just wanted to update this thread in case cosmo decides to ever post anything else up for sale. I took this car off his hands, Very VERY nice and honest guy. I can def. vouch for him in the future!
04-23-11, 05:49 PM
#15
Driver School Candidate
Join Date: Mar 2011
Location: MO
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
true that, i would say the same
Last edited by EKsc300; 04-25-11 at 12:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MattSEG
Performance & Maintenance
4
05-31-07 08:20 AM
