CAN-Other 1992 sc300 1jz vvti
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: michigan
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
1992 sc300 1jz vvti***new pictures 2nd page
I removed the 1000whp 2jz ge and turbo set up and swap in a 1jzgte vvti which is the newer 1jz (1998) out of a toyota mark IV (chaser jzx100) this 1jz come from factory with a single turbo instead of the older 1jz non vvti that had twins that were not strong and need a rebuild when you get the engine from oversea. the turbo spool way faster that the 1jz with the twins (2400rpm compared to 4500rpm) The motor also came with the r154 5 speed tranny from the chaser that i fitted to the sc300 body. Engine is stock and i added couple extras. The wiring was done by me, the whole harness needed to be extended and body connectors and factory chaser ecu to be repined to match body connector. Car runs smooth and strong on factory boost. exhaust sounds really good and not too loud.
- 3" intercooler piping
- 4" intercooler core 4x24x12 i think end to end is 31. in and out 3"
- Tial 50mm BOV
- OEM BOV block off plate
- custom 3" stainless steal down pipe with right from turbo outlet
- 3" flex
- 3" exhaust line to double 3" lines to 3" magnaflow (2x3" magnaflow)
- AEM wideband
- clutch fan deleted (electric fan installed)
- trac control cancelled
- Blue tockico on neuspeed springs.
- Lexus 400 Big brake kit on front.
- new feed gas line with filter
- 18" wheels
- Boost gauge, oil pressure gauge and wideband.
- Battery relocated to the trunk
- Killswitch
- line lock
- ABS deleted
i must miss other things
i am selling MY LHD sc300
$7500 canadian is my last price
I live in Canada (Windsor, Ontario) it is right next to Detroit, MI.
- 3" intercooler piping
- 4" intercooler core 4x24x12 i think end to end is 31. in and out 3"
- Tial 50mm BOV
- OEM BOV block off plate
- custom 3" stainless steal down pipe with right from turbo outlet
- 3" flex
- 3" exhaust line to double 3" lines to 3" magnaflow (2x3" magnaflow)
- AEM wideband
- clutch fan deleted (electric fan installed)
- trac control cancelled
- Blue tockico on neuspeed springs.
- Lexus 400 Big brake kit on front.
- new feed gas line with filter
- 18" wheels
- Boost gauge, oil pressure gauge and wideband.
- Battery relocated to the trunk
- Killswitch
- line lock
- ABS deleted
i must miss other things
i am selling MY LHD sc300
$7500 canadian is my last price
I live in Canada (Windsor, Ontario) it is right next to Detroit, MI.
Last edited by adam8103; 08-20-11 at 08:34 AM. Reason: new pictures
#7
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: michigan
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
even this year on this same forum one went with the stock 1jzvvti + w58 setup for $7000 and people were saying it was a good deal. my 1jzvvti + r154 setup with the extras on it is way to high? that is strange when guys are paying over 2Gs to have the r154 swap. then i am not talking about the custom 3" exhaust right from turbo, or 3" intercooler piping with 4" thick intercooler and tial bov...
anyways ill give it for free come and pick it up.
$7500 CANADIAN is my last price or i will keep it
anyways ill give it for free come and pick it up.
$7500 CANADIAN is my last price or i will keep it