CA 2003 Turbo Is300, GTE, Tec 3 with Wintec 4 chip. Fresh Tune. 10k
#1
Driver
Thread Starter
Join Date: Apr 2006
Location: CA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
SOLD!!
No trades!
The reason i am selling the car is i don't drive it anymore as i have no more time. I have driven about 25 miles in the past year. So as of right now i rather have someone else enjoy the car.
I have recent smog papers, did my smog 5 months ago.
I am not going to hold back any information about the car, if you guys have any questions or concern i will let you know, no bs. I am selling it for 13k OBO, need the cash so im looking for a quick sale, cash talks. Please call or email me your offers. Don't expect a 100% mint condition car as it is not.
The Carbon fiber hood needs a repaint, or re-cleared as the clear coat is gone. I do have scracthes here and there on the vehicle, it is 8 years old.
The AC needs to be charged.
IF there is someone out there looking to have a jump start on a boosted car with suspension, rims, kit, boost + built engine, this is a great buy. Parting out the whole car alone will get you more than 13k.
SPECS::
ENGINE:
* ARP Hardware
* 2JZ-GTE Pistons
* GTE HG
* 870CC siemens Injectors
* ACL Bearings
* Titan Cam Gear
* New timing Belt
* New Accessory Belt
* Aeromotive fuel pressure reg (not installed, will throw it in for free)
* Garrett 60-1 Turbocharger
* Tial 38mm Wastegate
* Tubular Stainless Steel Turbo Manifold
* Turboeast Built 3" Stainless Steel Downpipe
* Turboeast Built 3" Stainless Steel Racepipe
* 22x9x3 Large Front Mount Intercooler Polished
* Custom Silicone Couplers with Stainless Steel Lined Clamps
* Turboeast Built Mandrel Bent Intercooler Piping with Bead Rolled Ends
* Greddy Type S Blow Off Valve
* Walbro Fuel Pump
* NGK Colder Spark Plugs
* Turboeast Air Filter
* All Fittings, Hardware, and Gaskets
-Also has a Fully built auto tranny
- Full 3" Exhaust system with Apexi N1 exhaust
Electronics
- TEC 3 Electromotive Stand alone for IS300 by PFS (Just got the latest WinTec 4 chip upgrade)
- TRD GAUGE POD
- AEM TRU BOOST GAUGE
- AEM AIR/FUEL GAUGE
- AEM OIL TEMP GAUGE
- STAGE II COOLINGMIST KIT WITH CONTROLLER
- S2K Start button
SUSPENSION
- JIC FLT A2 COILOVERS
- JIC CF FRONT STRUT BAR
- CUSCO CF REAR STRUT BAR
Wheels
- 19" Piaa super rozzas
19x8 +42 and 19x9 +50 with 225/35/19 and 245/30/19 falken 452
Body
- Full cwest authentic kit
- VIS dual vent cf hood
- aerocatch hood pins
Minor
- Has rock chips on front bumper and a small crack on the bottom of bumper
- driver side rear quarter panel has a small key mark
**Also comes with a 10 gallon jug for the methanol. I have about 3-4 gallons left.
there is probably some minor stuff i left out.
i have invested well over 14k.
13K OBO!
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00583.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00584.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00585.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00586.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00587.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00588.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00589.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00590.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00580.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00590.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00582.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00591.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00592.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00593.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00594.jpg)
No trades!
The reason i am selling the car is i don't drive it anymore as i have no more time. I have driven about 25 miles in the past year. So as of right now i rather have someone else enjoy the car.
I have recent smog papers, did my smog 5 months ago.
I am not going to hold back any information about the car, if you guys have any questions or concern i will let you know, no bs. I am selling it for 13k OBO, need the cash so im looking for a quick sale, cash talks. Please call or email me your offers. Don't expect a 100% mint condition car as it is not.
The Carbon fiber hood needs a repaint, or re-cleared as the clear coat is gone. I do have scracthes here and there on the vehicle, it is 8 years old.
The AC needs to be charged.
IF there is someone out there looking to have a jump start on a boosted car with suspension, rims, kit, boost + built engine, this is a great buy. Parting out the whole car alone will get you more than 13k.
SPECS::
ENGINE:
* ARP Hardware
* 2JZ-GTE Pistons
* GTE HG
* 870CC siemens Injectors
* ACL Bearings
* Titan Cam Gear
* New timing Belt
* New Accessory Belt
* Aeromotive fuel pressure reg (not installed, will throw it in for free)
* Garrett 60-1 Turbocharger
* Tial 38mm Wastegate
* Tubular Stainless Steel Turbo Manifold
* Turboeast Built 3" Stainless Steel Downpipe
* Turboeast Built 3" Stainless Steel Racepipe
* 22x9x3 Large Front Mount Intercooler Polished
* Custom Silicone Couplers with Stainless Steel Lined Clamps
* Turboeast Built Mandrel Bent Intercooler Piping with Bead Rolled Ends
* Greddy Type S Blow Off Valve
* Walbro Fuel Pump
* NGK Colder Spark Plugs
* Turboeast Air Filter
* All Fittings, Hardware, and Gaskets
-Also has a Fully built auto tranny
- Full 3" Exhaust system with Apexi N1 exhaust
Electronics
- TEC 3 Electromotive Stand alone for IS300 by PFS (Just got the latest WinTec 4 chip upgrade)
- TRD GAUGE POD
- AEM TRU BOOST GAUGE
- AEM AIR/FUEL GAUGE
- AEM OIL TEMP GAUGE
- STAGE II COOLINGMIST KIT WITH CONTROLLER
- S2K Start button
SUSPENSION
- JIC FLT A2 COILOVERS
- JIC CF FRONT STRUT BAR
- CUSCO CF REAR STRUT BAR
Wheels
- 19" Piaa super rozzas
19x8 +42 and 19x9 +50 with 225/35/19 and 245/30/19 falken 452
Body
- Full cwest authentic kit
- VIS dual vent cf hood
- aerocatch hood pins
Minor
- Has rock chips on front bumper and a small crack on the bottom of bumper
- driver side rear quarter panel has a small key mark
**Also comes with a 10 gallon jug for the methanol. I have about 3-4 gallons left.
there is probably some minor stuff i left out.
i have invested well over 14k.
13K OBO!
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00583.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00584.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00585.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00586.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00587.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00588.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00589.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00590.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00580.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00590.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00582.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00591.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00592.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00593.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00594.jpg)
![](http://i18.photobucket.com/albums/b107/PandaxBear1/DSC00595.jpg)
Last edited by GenuineKid; 02-23-12 at 10:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post