Name: Lex
Location: Raleigh/ Durham NC
Contact: call or text 7O4-34O-4539
Price: $49,500 obo



Selling my 1993 Lexus SC400 (2JZGTE w/ 6 manual speed swap)

Car makes 1035hp at 35psi on VP C16 race fuel and is well capable of more power. The Engine was professionally built by Titan Motorsports and ive only put 2300 miles on it since.

Modification List:

ENGINE:
CNC Port King Kong Cylinder Head.

Ferrea Valve Package:
Competition Plus Intake and Exhaust Valves (Super Flow 1mm Oversized).
Dual Valve Springs - Special Alloy.
Titanium Retainers.
Spring Seat Locators.
Valve Locks.
Titan Motorsports 280 Cams.
HKS Adjustable Cam Gears.
1/2" ARP Head Studs.

Titan Motorsports short block:
Lightened and Balanced, Polished Crank Shaft.
Manley 14402-6 Pro Series Turbo Tuff I Beam Connecting Rods
CP Pistons CPP CUS60021 SC7460 pistons with upgraded wrist pins
CLEVITE Rod bearings - CLE CB-1628P CONN. ROD BEARING SET
CLEVITE Main Bearings CLE MS-2014AL MAIN BEARING SET
CLEVITE TW-589S THRUST WASHER SET
Titan Motorsports SUP-ENG-PUL 2JZ - Dampened Crank Pulley (PN: 918562)
Titan Motorsports Modified Oil Pump.
ARP Main Cap Bolts.

TURBO KIT:
VirtualWorks T4 tubular Turbo manifold.(Ceramic Coated).
Precision Billet 7675 JB Turbocharger w/ Anti surge Compressor Housing.(zero shaft play).
PMB RaceWorks Custom oil feed Hardline.
Stainless Steel Braided -12an oil return line w/ Billet block adapter Flange.
PMB RaceWorks Custom fit 3" aluminum Intercooler piping.
PMB RaceWorks 4" Turbo Inlet Intake Pipe w/ AEM Filter.
ETS 4" Core Intercooler.
Tial Q 50mm BOV.
Custom 4" Stainless Steel V-band Downpipe
Tial 44mm vband WasteGate.
Custom 304ss dump tube.
3" silicone Couplers and Vibrant Stainless Tbolt Clamps

FUEL SYSTEM:
FIC High Impedance 2000cc Injectors
Fullblown 340HP In-tank Fuel Pump
Aeromotive A1000 Fuel Pump (external)
Aeromotive Inline Fuel Filter.
PMB Custom Fuel Surgetank
Stainless Steel Braided -8an Fuel Feed lines & -6an Fuel Return Lines.
Hypertune 90mm Street Intake, with throttle body and Fuel Rail
Weldon Adjustable FPR w/ Fuel Press Gauge.

EXHAUST:
PMB RaceWorks Custom 4" Aluminum Straight Pipe Slant back Exhaust System.

COOLANT SYSTEM:
Mishimoto 3-Row Aluminum Radiator
Mishimoto Aluminum Dual Fan Shroud w/ Dual Electric Fans
PMB RaceWorks Custom Upper Water Neck Expansion Filler Tank w/ 1.3bar Cap.
Titan Motorsports Upper Radiator Hard pipe w/ Silicone Couplers.
Brand New OEM Toyota Water Pump.

CLUTCH/ DRIVETRAIN:
RPS Carbon-Carbon Twin Disc Clutch Kit.
RPS 14lb aluminum flywheel.
Brand New OEM Toyota Slave Cylinder.
Getrag V160 6spd Transmission. (Rebuilt by Induction Performance)
DriveShaftshop 1pc Chromoly Driveshaft w/ Billet adapters.
Supra Rear Differential w/ 4.27 Ring & Pinion Gears.(several gears included)
DriveShaftshop Pro Level Chromoly Axles w/ Large Hubs.(Fresh Hub Bearings & extended ARP wheel studs)


ELECTRONICS/ IGNITION:
AEM 30-6100 ECU EMS (Engine Management System) (with custom tune by Tex @ BRE)
AEM 5bar Map Sensor.
Intake Temp Sensor.
GM LSx External Ignition Coils w/ MSD Wires.(Deleted Factory Ignitor)
NGK BKR7E Spark Plugs.
AEM Boost MAC Solenoid.
Tweak'd Performance Custom Engine Harness.

INTERIOR:
Cipher Reclinable Race Seats.
4pt Racing harnesses.
Custom Chromoly Tube Adjustable Harness bar.
Lextech Gauge Cluster.
AEM Wideband Gauge
AEM Tru Boost Gauge.
Prosport 3" Tachometer.
Prosport Oil Pressure Gauge.
Pioneer Double Din Touch Screen Head Unit.
Sparco Steering wheel.
NRG Quick Release Hub.
The Interior has been gutted for the most part, BUT you still have the option of A/C and HEAT!!!

EXTERIOR:
Custom Paint.
VIS Carbon Fiber Hood.
VIS Carbon Fiber Trunk.
Vertex Rep Body Kit.
Kouki Fog Lights.

WHEELS:
19inch Volk Rays Engineering TE37 Wheels
- Rear 19x10.5 , Front 19x8.5 +22 offset.
15x10.5 Weld Wheels with Mickey Thompson 11.5 Drag Slicks.

SUSPENSION/ BRAKES:
D2 RS 36 way adjustable coilovers
D2 Front and Rear Big Brake Kit (8 pot, 4 pot)


THERE IS MUCH MORE BUT THERE IS WAY TOO MUCH TOO LIST.

I WILL POST PICS AND VIDS LATER TONIGHT!


I have over $75,000 invested into this car and I am just ready to get out of it. I do not have the time anymore. My loss is your gain.


If you were to build this car again, you will spend well over what I have in it. All parts were purchased brand new and I have receipts.

 

pics and vids inside....NOT!

 

^^^

stop trolling

Original OP, with that low post count, i hope you have some vouchers for a car you want $50K for. We understand you spent $75K, but we all know your always lucky to even recoup 40% of that in general.

GLWS.

 

Truth. Pictures will do justice.

 

Seen this car on ebay earlier tonight.. Definitely need a vouch...Think this is the wrong crowd for what your trying to sell.. GL though

 

I personally know the owner of this car. I will vouch for him. This car is absolutely amazing to see and hear.

Sorry to see you sellin her, Shef! :-(

 

Seen it at IA

 

Seen a youtube video of the car and i always go back and watch it quite inspiring even if im only shooting for half the horsepower in my GTE. GLWS

 

Seen the car and met the owner at Import Alliance. Personally vouching for a stand up guy and a car thats put together better than just about anything on this website. Ridiculous fabrication work here.

 

in for video!

 

Still waiting on Pics and Vid, it has been over 2 weeks now...

 

consider parting out?

 

search 1100whp SC400 on youtube. Also, I talked to the owner of this car last night for a bit. If the car doesn't sell, he's thinking of swapping this stuff over to an SC430 chassis.

 

Nice SC no doubt even at $29K it probably won't sell here probably best parting it out. For $50K I would expect at least Carillo' rods, authentic body kit pieces etc... Not trying to be disrespectful just letting you know what to expect selling it here.

 

$50k for a sc300...bwhaahahahahahaahhahahahahhaha!