CA 93 SC300 1JZ Auto
07-27-13, 11:31 PM
#1
93 SC300 1JZ Auto
Hey Guys its time for me to part ways with my SC300.
Its a 1993 with about 200k on the chassis, i have the battier out of the car and i don't remember the exact mileage. The car has been parked for almost a year, i keep telling my self im going to fix the oil leak and drive it but life gets in the way.
Exterior:
Full 97+ kit (no wing)
97 tail lights
all badge holes have been filled and painted
antenna shaved and painted
Suspension:
Tein Super street C/O
Tanabe Supra front sway bar
all front control arm bushings replaced with energy bushings
Rear battle version toe arms
rear battle version traction arms
power steering rack busing replaced with dazin
Greddy Front strut tower brace
wheels/Brakes:
SSR GT3 19x9.5F 19X13R (needs new tires)
30mm hub adapters in the front
Ls400 front conversion
Braided goodrich lines
Engine/Trans:
1JZ-GTE built by Drift Motion (forged probe pistons, arp everything ect) Engine has less than 200 miles on it, seems to be a oil leak from the front main seal and or cam seal.
SS power steering line
CX racing Single turbo manifold that has had the weld slag all cleaned and the welds gone over
CX racing T68
CX 38mm wast gate
CX front mount 3IN core
HKS SSQV
Drift motion fuel damper bypass
Blits NUR Spec axle back
Interior:
Front two eat were replaced with black, rear was sprayed in black
from the wood trim down the interior has been recovered in black (door panel, lower dash, glove box, center console, rear side trim)
AEM AFR gauge (in glove box)
AEM Boost controller with gauge (in glove box)
double din with nav.
Bad / Things i havnt gotten to yet
Fix oil leak in the front
No carpet at the moment (have to call my interior guy and see if he still has it)
was going to replace the raid. with aluminum
Currently has two electric fans, (was going to buy OEM shroud and reinstall OEM mechanical fan ( i have the fan but shroud is kinda busted)
needs 3in mid section (has factory that bolted on and works but was going to replace with cat less one)
Clear has faded on the roof in a few spots.
Im asking $9000 or $8250 with out wheels.
i will follow up with images
Its a 1993 with about 200k on the chassis, i have the battier out of the car and i don't remember the exact mileage. The car has been parked for almost a year, i keep telling my self im going to fix the oil leak and drive it but life gets in the way.
Exterior:
Full 97+ kit (no wing)
97 tail lights
all badge holes have been filled and painted
antenna shaved and painted
Suspension:
Tein Super street C/O
Tanabe Supra front sway bar
all front control arm bushings replaced with energy bushings
Rear battle version toe arms
rear battle version traction arms
power steering rack busing replaced with dazin
Greddy Front strut tower brace
wheels/Brakes:
SSR GT3 19x9.5F 19X13R (needs new tires)
30mm hub adapters in the front
Ls400 front conversion
Braided goodrich lines
Engine/Trans:
1JZ-GTE built by Drift Motion (forged probe pistons, arp everything ect) Engine has less than 200 miles on it, seems to be a oil leak from the front main seal and or cam seal.
SS power steering line
CX racing Single turbo manifold that has had the weld slag all cleaned and the welds gone over
CX racing T68
CX 38mm wast gate
CX front mount 3IN core
HKS SSQV
Drift motion fuel damper bypass
Blits NUR Spec axle back
Interior:
Front two eat were replaced with black, rear was sprayed in black
from the wood trim down the interior has been recovered in black (door panel, lower dash, glove box, center console, rear side trim)
AEM AFR gauge (in glove box)
AEM Boost controller with gauge (in glove box)
double din with nav.
Bad / Things i havnt gotten to yet
Fix oil leak in the front
No carpet at the moment (have to call my interior guy and see if he still has it)
was going to replace the raid. with aluminum
Currently has two electric fans, (was going to buy OEM shroud and reinstall OEM mechanical fan ( i have the fan but shroud is kinda busted)
needs 3in mid section (has factory that bolted on and works but was going to replace with cat less one)
Clear has faded on the roof in a few spots.
Im asking $9000 or $8250 with out wheels.
i will follow up with images
Last edited by $C300; 07-27-13 at 11:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
konspec
Lexus Vehicles Classifieds
26
11-12-10 01:23 PM
