TX 1997 Lexus SC400 white ext. black int.
#1
Driver
Thread Starter
1997 Lexus SC400 white ext. black int.
I'm the 2nd owner according to Carfax. This SC is my daily driver. It has 230k+ miles on chassis and 115K on current engine. Only reason I replaced the engine was because of oil leaks but still ran great. Current engine was removed from another 1997 with 102K miles. This engine has been completely sealed with new water pump and timing belt.
Some Goodies:
Powered By Max Coilovers with Swift springs front only. 22k front 14k rear
New Supra TwinTurbo front lower control arms
Polyurethane rear upper control arm bushings
New rear sway bar end links
Goodridge stainless steel braided brake lines
LS400 4 piston calipers
Hydraulic Fan delete. 16" pusher fan mounted in front of A/C Condenser
Drop in K&N air filter
I also have a wingless trunk lid that i can go with the car.
Bads:
It does have dings, dents, scratches, rips, cracks and the normal wear and tear for a car that is driven daily.
Transmission pan will need reseal sometime soon. Its wet around the pan. Not leaking yet.
A non ABS engine harness was installed with the current engine as I was going to delete the ABS system but never got around to do it so the ABS light will stay on until bulb is removed.
If you bring your own wheels ill let it go for 5500.
With the Work Vs-kf Wheels 19x9 19x11 is 6900 FIRM!
Another 700 I'll throw in The Inspection Bumper(aftermarket 1 of 2 in the US) That's what I've been told.
Local pick up only please. I'm located in North Dallas, Texas. Clean Texas Title in my name.
Please PM for phone number.
Some Goodies:
Powered By Max Coilovers with Swift springs front only. 22k front 14k rear
New Supra TwinTurbo front lower control arms
Polyurethane rear upper control arm bushings
New rear sway bar end links
Goodridge stainless steel braided brake lines
LS400 4 piston calipers
Hydraulic Fan delete. 16" pusher fan mounted in front of A/C Condenser
Drop in K&N air filter
I also have a wingless trunk lid that i can go with the car.
Bads:
It does have dings, dents, scratches, rips, cracks and the normal wear and tear for a car that is driven daily.
Transmission pan will need reseal sometime soon. Its wet around the pan. Not leaking yet.
A non ABS engine harness was installed with the current engine as I was going to delete the ABS system but never got around to do it so the ABS light will stay on until bulb is removed.
If you bring your own wheels ill let it go for 5500.
With the Work Vs-kf Wheels 19x9 19x11 is 6900 FIRM!
Another 700 I'll throw in The Inspection Bumper(aftermarket 1 of 2 in the US) That's what I've been told.
Local pick up only please. I'm located in North Dallas, Texas. Clean Texas Title in my name.
Please PM for phone number.
#6
Pole Position
Nice car GLWS!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
98supra6sp
Performance & Maintenance
7
07-24-16 07:22 PM
SonyaSC400
Performance & Maintenance
15
07-07-07 06:02 PM