Best place to get quality HIDs?
#1
Pole Position
Thread Starter
Join Date: May 2005
Location: San Diego, CA - USA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Best place to get quality HIDs?
I have been looking at HID Planet but they won't return my emails.
I am looking for something simple that I can install on my own - plug and play - but dont want crappy quality. I am not interested in spending a little less at THE BAY to end up with not so hot quality.
Please let me know where I can find what I am looking for. Thanks for your time!
I am looking for something simple that I can install on my own - plug and play - but dont want crappy quality. I am not interested in spending a little less at THE BAY to end up with not so hot quality.
Please let me know where I can find what I am looking for. Thanks for your time!
#3
Pole Position
Thread Starter
Join Date: May 2005
Location: San Diego, CA - USA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
#4
Personally I'm not a fan of the bmw projectors, however I am doing a tsx retrofit on my headlights. It's not difficult at all and once you have the projectors and HID kit, the rest is chump change and elbow grease. Make sure when you order your HID kit, you get a 9006 harness and the correct bulb for your retrofit projector (usually d2s). I'll post pictures once I'm done.
cost for me was:
$150 shipped for a pair of TSX projectors on ebay
$180 shipped for a 6000k 9006 kit with D2S bulbs
$1.50 of scrap acrylic at lowes
$2.00 of bolts, washers and nuts
$10.00 on rubbing, polishing compound to clean the headlight housings, 2000 and 1500 grit to deline and smooth out the headlight covers.
It takes a little while, but not very difficult. You'll need a drill and dremel to cut the acrylic to make an adaptor plate that fits the tsx and sc300 housing together.
cost for me was:
$150 shipped for a pair of TSX projectors on ebay
$180 shipped for a 6000k 9006 kit with D2S bulbs
$1.50 of scrap acrylic at lowes
$2.00 of bolts, washers and nuts
$10.00 on rubbing, polishing compound to clean the headlight housings, 2000 and 1500 grit to deline and smooth out the headlight covers.
It takes a little while, but not very difficult. You'll need a drill and dremel to cut the acrylic to make an adaptor plate that fits the tsx and sc300 housing together.
Last edited by gario; 02-11-07 at 02:10 PM.
#5
Pole Position
Thread Starter
Join Date: May 2005
Location: San Diego, CA - USA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Are there any options that don't include the hand cutting acrylic? I am not really skilled in such a process.
Can I just use my stock projectors? Or purchase some that just bolt in and replace mine?
Can I just use my stock projectors? Or purchase some that just bolt in and replace mine?
#6
Lexus Test Driver
Join Date: Nov 2006
Location: Georgia
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
go ahead and use the stock projectors if you want to have a beam pattern all over the place.
the best way to do this is to do exactly what gario just told you, TSX projectors are a popular replacement for ours when retrofitting.
i personally am not skilled at it either, so either figure it out yourself doing it the same way or spend the extra bucks to have someone else do it and save yourself some frustration, its your call.
there is no shortcut though if you want to do it right
the best way to do this is to do exactly what gario just told you, TSX projectors are a popular replacement for ours when retrofitting.
i personally am not skilled at it either, so either figure it out yourself doing it the same way or spend the extra bucks to have someone else do it and save yourself some frustration, its your call.
there is no shortcut though if you want to do it right
#7
Personally I'm not a fan of the bmw projectors, however I am doing a tsx retrofit on my headlights. It's not difficult at all and once you have the projectors and HID kit, the rest is chump change and elbow grease. Make sure when you order your HID kit, you get a 9006 harness and the correct bulb for your retrofit projector (usually d2s). I'll post pictures once I'm done.
cost for me was:
$150 shipped for a pair of TSX projectors on ebay
$180 shipped for a 6000k 9006 kit with D2S bulbs
$1.50 of scrap acrylic at lowes
$2.00 of bolts, washers and nuts
$10.00 on rubbing, polishing compound to clean the headlight housings, 2000 and 1500 grit to deline and smooth out the headlight covers.
It takes a little while, but not very difficult. You'll need a drill and dremel to cut the acrylic to make an adaptor plate that fits the tsx and sc300 housing together.
cost for me was:
$150 shipped for a pair of TSX projectors on ebay
$180 shipped for a 6000k 9006 kit with D2S bulbs
$1.50 of scrap acrylic at lowes
$2.00 of bolts, washers and nuts
$10.00 on rubbing, polishing compound to clean the headlight housings, 2000 and 1500 grit to deline and smooth out the headlight covers.
It takes a little while, but not very difficult. You'll need a drill and dremel to cut the acrylic to make an adaptor plate that fits the tsx and sc300 housing together.
Trending Topics
#8
Pole Position
Thread Starter
Join Date: May 2005
Location: San Diego, CA - USA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
go ahead and use the stock projectors if you want to have a beam pattern all over the place.
the best way to do this is to do exactly what gario just told you, TSX projectors are a popular replacement for ours when retrofitting.
i personally am not skilled at it either, so either figure it out yourself doing it the same way or spend the extra bucks to have someone else do it and save yourself some frustration, its your call.
there is no shortcut though if you want to do it right
the best way to do this is to do exactly what gario just told you, TSX projectors are a popular replacement for ours when retrofitting.
i personally am not skilled at it either, so either figure it out yourself doing it the same way or spend the extra bucks to have someone else do it and save yourself some frustration, its your call.
there is no shortcut though if you want to do it right
I am in Sacramento, CA and wondering if there is a shop nearby that will do it or a member here with some experience that is willing to do it for a fair price??
#9
Mortgage Slave
While a PnP kit basically does the job I should have saved up a bit more and did a D2S proper retrofit instead. I don't have much of a problem with my cut off BUT the output of a dedicated D2S system seems a lot clearer and brighter than a PnP kit.
#10
Lexus Test Driver
Join Date: Nov 2006
Location: Georgia
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
#11
Pole Position
Thread Starter
Join Date: May 2005
Location: San Diego, CA - USA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Were HIDs a manufactured option on the SC's? If so, did they use the same stock projectors? Does the dealership offer the upgrades?
If all that is possible, how do they compare to the retrofits that others are doing? Same, better, or worse quality?
If all that is possible, how do they compare to the retrofits that others are doing? Same, better, or worse quality?
#12
Lexus Test Driver
Join Date: Nov 2006
Location: Georgia
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
no HID's ever came stock and it is impossible to upgrade through dealer
#15
Instructor
iTrader: (2)
Since you're willing to spend some extra cash, then you can also ask/pay some CL members (who have done it) to do the job for you. It doesn't hurt to try. Send them PM and tell them your request.
Check the lighting forum, there are some guys posted their HID retrofit mod.
Check the lighting forum, there are some guys posted their HID retrofit mod.