Luke_in_SD

I just bought and installed a set, the light output pretty good, but my only concern is that the stock bulbs are 55watts and Noyka bulbs say 70watt / stock wattage. Although the housing gets pretty hot, the wiring harness does not seem to melt and nothing seems to burn. I never really touched the housing with the old bulbs in so I don't know how hot it gets stock. But it seems like 55watt and 70watt is not a huge difference. What do you guys think

This is on a 95 SC400

sc250tt

i was looking into bulbs today .If you dont mind me asking how much was it and where did you get them. 1 dont think 70 watts will have an effect on the stock harness but not to sure though

CyberSC4

Its not going to melt right away thats all. Best to get a heavy duty harness.

Luke_in_SD

if it melts the harness I can always get another one. I only use them at night

TheMole

iTrader: (13)

If the stock harness melts you have to cut the oem wire. Why not just get a heavy duty harness so you'll have no worries. They aren't too expensive anyways probably cheap than oem ones.

nysupraman

mines on a 97 upgrade, but no problem here! clear bright output combined with yellow film of course

Luke_in_SD

that looks good but I don't know why but the film looks chessy

TommySC300

iTrader: (1)

my hid foglight