(56k = fail) My First Retro :)
#16
Racer
Looks good.I use a water jet to do my brackets.
https://www.clublexus.com/forums/sho...hreadid=126882
https://www.clublexus.com/forums/sho...hreadid=126882
Last edited by lexus4jess; 01-15-08 at 09:27 AM.
#17
Lead Lap
iTrader: (7)
Hey dudes,
While messing around with the headlights last night (a mate of mine is doing a retro on his Y32 Cedric) we were discussing if the auto-leveling function could be incorporated into the retro. Has anyone been successful in fitting one to an SC headlight? I'd be worried that the headlight would suffer from leakage if it wasn't sealed properly and that the motor/solenoid unit is too big for the headlight back housing.
What do you guys think?
While messing around with the headlights last night (a mate of mine is doing a retro on his Y32 Cedric) we were discussing if the auto-leveling function could be incorporated into the retro. Has anyone been successful in fitting one to an SC headlight? I'd be worried that the headlight would suffer from leakage if it wasn't sealed properly and that the motor/solenoid unit is too big for the headlight back housing.
What do you guys think?
#18
Mortgage Slave
Thread Starter
Yeah, the more I look at it the only way that I can see it fitting is if I...
Too much effort I think. And I don't think there's enough space for the projector to move up and down
Thanks mate, it was actually indypwr's retro on his old white SC300 that made me want to change my PnP kit to a full retro. Just curious, do your brackets fit only the Audi TT projectors or can the be made to fit any projector?
- Remove the top aiming adjuster and dapt the solenoid fitting from the RX330
- Remove the paring light make the bracket to span the distance to the parker and replace the parker with a CCFL ring around the projector
Too much effort I think. And I don't think there's enough space for the projector to move up and down
Thanks mate, it was actually indypwr's retro on his old white SC300 that made me want to change my PnP kit to a full retro. Just curious, do your brackets fit only the Audi TT projectors or can the be made to fit any projector?
#19
Mortgage Slave
Thread Starter
I think I'm closing in on this whole bracket situation Only way I can see the bracket fitting the projector is if part of the top aim adjustment is slightly tapered in one corner to clear the projector itself... there shouldn't be too much problem doing that? Oh and one of the screws for the ball joints will have to be removed since it comes in waaaaaay too close to the projector mounting hole.
So it's off to get a prototype made up and if all is well then straight to the machine shop to get it cut
So it's off to get a prototype made up and if all is well then straight to the machine shop to get it cut
#21
Pole Position
Keep us posted! It looks great. Sorry if I missed it earlier but BLK, do you have any plans for the lenses?
#23
Mortgage Slave
Thread Starter
^ Hey,
I'm waiting for my brackets to arrive (thanks to Lexus4Jess). It's all paid for and sent but it's taking it's sweet **** time to get to Oz. Does anyone know how long first class mail takes to arrive?
When they arrive I'll be back on to the project, as without that I can't put my retrofit together
I'm waiting for my brackets to arrive (thanks to Lexus4Jess). It's all paid for and sent but it's taking it's sweet **** time to get to Oz. Does anyone know how long first class mail takes to arrive?
When they arrive I'll be back on to the project, as without that I can't put my retrofit together
#28
Mortgage Slave
Thread Starter
LOL sorry for not updating this thread
Anyway, the retro is only half done, I still have to deline the projector areas on the lenses, and I might sand back on the brackets however they're in and they work fine. I'm running D4S ballasts/bulbs. I've had the retro installed for about a month.
Sorry about the crappy picture quality.
The RX non-AFS projectors are huge... barely fits in the Soarer housings.
The cut off is blurry, I still need to deline the lenses... these next few were shot from about 15m (approx. 50ft) from the wall.
It's my first shot at a retro, but I would recommend doing a proper retrofit over a PnP kit anyday (or should that be night?) of the week.
Cheers
Jose
Anyway, the retro is only half done, I still have to deline the projector areas on the lenses, and I might sand back on the brackets however they're in and they work fine. I'm running D4S ballasts/bulbs. I've had the retro installed for about a month.
Sorry about the crappy picture quality.
The RX non-AFS projectors are huge... barely fits in the Soarer housings.
The cut off is blurry, I still need to deline the lenses... these next few were shot from about 15m (approx. 50ft) from the wall.
It's my first shot at a retro, but I would recommend doing a proper retrofit over a PnP kit anyday (or should that be night?) of the week.
Cheers
Jose