Sc300 Horrible Light Output!?? Even after Retrofitting!
#31
my bulbs came with my projectors so they already have an X amount of hours on them so I cant really comment. but from my research the 85122+ are pretty white to begin with however the regular 85122 needs time to color shift..
#32
Lexus Test Driver
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Ca
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Teaser Pictures.. they are installed right now Im waiting for NIGHTTIME
old x5 projectors.. yea compared to the tsx they were pretty cloudy
its replacement
test fitting ...
more pictures when i get the aiming and nighttime comes
old x5 projectors.. yea compared to the tsx they were pretty cloudy
its replacement
test fitting ...
more pictures when i get the aiming and nighttime comes
#35
Pole Position
O.P, welcome to the club. I've done several SC retrofits over the years and can tell you from experience that the OEM Toyota lenses don't do HID light too much justice.
They were created for Halogen lighting in the 90s and not HID. What you're going to need to do is to buy a set of clear SC aftermarket lenses.
About a year ago, these aftermarket SC headlamps with clear lenses popped up on Ebay for about 250-300 a set. I'm not sure if they're still available but if you can hunt down a set or a seller selling them, perhaps they can sell you the front SC clear plastic lense.
The difference between that headlamp lense and your OEM stock lense is the new one is gem clear like the OEM BMW X5 and Acura TSX headlamp lense. Therefore more clear output shines through which = a better HID experience vs where you are now.
Good luck and feel free to ask any questions!
They were created for Halogen lighting in the 90s and not HID. What you're going to need to do is to buy a set of clear SC aftermarket lenses.
About a year ago, these aftermarket SC headlamps with clear lenses popped up on Ebay for about 250-300 a set. I'm not sure if they're still available but if you can hunt down a set or a seller selling them, perhaps they can sell you the front SC clear plastic lense.
The difference between that headlamp lense and your OEM stock lense is the new one is gem clear like the OEM BMW X5 and Acura TSX headlamp lense. Therefore more clear output shines through which = a better HID experience vs where you are now.
Good luck and feel free to ask any questions!
#36
Lexus Test Driver
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Ca
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
yea 85122+ were really yellow i didnt like them.. but here are the 6000k for so far... A HUGE increase
no mounting bracket... I used the stock adjustments and bent them into the tsx lights.. it worked well i just had to trim more off the tsx projector but i had a angle grinder so it was no big deal..
old x5
tsx
prettty happy so far.. the driver side has to come down a little more thou.. but so far so good =)
no mounting bracket... I used the stock adjustments and bent them into the tsx lights.. it worked well i just had to trim more off the tsx projector but i had a angle grinder so it was no big deal..
old x5
tsx
prettty happy so far.. the driver side has to come down a little more thou.. but so far so good =)
#37
I think you may have gotten dud 85122+ cause my brother also has a tsx retrofit on his acura cl but hes using my knockoff 4300k from ebay and my lighting is far brighter and more intense then his. so I really dont know what to tell you. but if your happy with the 6000k then power to ya. get those pictures up of the completed project!
#39
Lexus Test Driver
Thread Starter
iTrader: (8)
Join Date: Sep 2007
Location: Ca
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
85122+ are in.. but they still look yellow... but here are the pictures... true color is what is coming out of my headlights.. what you see on the ground is the color my camera turned it into.. white.. but yea its pretty yellow .. but the light output is GREAT.. so i dont know what bulbs ill stick with yet.
#40
output looks great!.. but you shoulda listened to me with the brackets. now the projector isnt centered in the housing. looks a little off with it like that. but way better then those x5's you had
Thread
Thread Starter
Forum
Replies
Last Post
Nichles3
LS - 1st and 2nd Gen (1990-2000)
5
05-05-14 02:44 PM
300, clear, deline, fog, headlight, headlights, hid, lens, lexus, light, plastic, projectors, retrofit, retrofiting, retrofitted, sc, sc300