HID foglights
#1
HID foglights
I'm thinking of installing HIDs for my foglights in my 07 RX350. Has anyone done this and if so, do you get a bulb out indicator due to dropping the wattage output from 55 to 35?
Thanks
Thanks
#3
lol, i installed HIDs in all lights and the only ones i've had problems with have been the fog lamps!
a couple of months ago i noticed the passenger side fog lamp was out. initially i thought it was the ballast. i troubleshot it and it turned out to be the bulb. i ordered replacement bulbs from HIDeXtra and they worked flawlessly up until today!!! i went out earlier and noticed that the driver side fog lamp is out and i'm assuming it is the bulb again!
i'm considering getting LEDs that will go in the fog light housing. this is getting annoying.
a couple of months ago i noticed the passenger side fog lamp was out. initially i thought it was the ballast. i troubleshot it and it turned out to be the bulb. i ordered replacement bulbs from HIDeXtra and they worked flawlessly up until today!!! i went out earlier and noticed that the driver side fog lamp is out and i'm assuming it is the bulb again!
i'm considering getting LEDs that will go in the fog light housing. this is getting annoying.
#6
don't know what to tell ya. it seems like my luck has run out lately. for now i just shut them off but i will be looking to get new H3 bulbs for the fogs. possibly HID, LED, or CREE. i dunno. we'll see
#7
That's sucks because you made the cut/mod in the fog light housing to get the wiring in.
Trending Topics
#11
#14
ldc Quote:
Originally Posted by rselby
I have put some HID 9006 in my fog lights on my 07 is350...no problems at all...all plug n play..hid extra, bulbs n ballast 6k
I'm waiting for mine, did you disconnect the battery to do the fog conversion? no I did not disconnect the battery...made sure I had the lights off...was all plug n play very easy once u got to the OEM fog light
Originally Posted by rselby
I have put some HID 9006 in my fog lights on my 07 is350...no problems at all...all plug n play..hid extra, bulbs n ballast 6k
I'm waiting for mine, did you disconnect the battery to do the fog conversion? no I did not disconnect the battery...made sure I had the lights off...was all plug n play very easy once u got to the OEM fog light
#15
I finally installed 5K HID fog lights and they look great and noticeably add a lot more light onto the road. For the left side, I had to remove the battery so I had room to reach down and install the light and the ballast. For the right side, I had to remove the cover panel but there is less room to work with than the left side.
Now I need to change my low beams to either 5K or 6K. I have 6K HIDs on my other car and the light is much better to see reflective road paint than the OEM 4300s.
I recommend that everyone should do this change.
Now I need to change my low beams to either 5K or 6K. I have 6K HIDs on my other car and the light is much better to see reflective road paint than the OEM 4300s.
I recommend that everyone should do this change.