XENON's ES!!!!
09-28-02 | 01:29 PM
#31
Advanced
Joined: May 2002
Posts: 643
Likes: 5
From: TX
Nokya bulbs aren't that bad either. my bro's accord is using Nokya 9005 and 9006's. the same bulbs as the ES. and the color is still very white. it's much clearer, and quite a bit cheaper. i have sylvania hyper white bulbs in my high beams for some reason. i never bought them. the guy that fixed my car last time sorta put 'em in. so i'm happy with my high's, but mad about my low's. need to fix my low's and fog's. they're aimed wierd.
09-28-02 | 01:42 PM
#32
Thread Starter
Lexus Test Driver
Joined: Jun 2002
Posts: 893
Likes: 1
From: Chicago
yah how do we adjust the low's. Here's a pic of Sylvania COOL BLUES in the left, and Hipers on the right, I want to aim the bulb higher to match the cool blue's displacement cuz all these Xenons just don't provide enough light.
-nokya's are good too. at most shops they go for around $40, ebay has them in the $20 range for set of 2 bulbs.
-nokya's are good too. at most shops they go for around $40, ebay has them in the $20 range for set of 2 bulbs.
09-28-02 | 01:44 PM
#33
Advanced
Joined: May 2002
Posts: 643
Likes: 5
From: TX
i'll show you a pic of my low's and fog's tonight. they look so off... they're like completely off balance. and my right housing isn't put in right. if i push it in so it's in the correct spot, my light goes DOWN like 2 inches. so my housing looks wierd.
09-28-02 | 01:52 PM
#34
Thread Starter
Lexus Test Driver
Joined: Jun 2002
Posts: 893
Likes: 1
From: Chicago
Originally posted by Zeta
i'll show you a pic of my low's and fog's tonight. they look so off... they're like completely off balance. and my right housing isn't put in right. if i push it in so it's in the correct spot, my light goes DOWN like 2 inches. so my housing looks wierd.
i'll show you a pic of my low's and fog's tonight. they look so off... they're like completely off balance. and my right housing isn't put in right. if i push it in so it's in the correct spot, my light goes DOWN like 2 inches. so my housing looks wierd.
DOES anybody know how to correct the aim of the Low's???
i'm lazy like that.
09-30-02 | 02:46 AM
#38
Lexus Champion
Joined: Oct 2001
Posts: 2,314
Likes: 3
From: North Carolina
when you adjust the aim, you are adjusting both the highs and lows. the bolt that has the clear plastic (probably broken) measuring tool on it, allows you to aim the lights left and right. The long bolt that sticks out really far and is way below that one (near the bottom of the brights) is the one that adjusts height. Use your leveling bubble to help with the vertical aiming
09-30-02 | 09:11 PM
#39
Originally posted by XenonES3
I want to aim the bulb higher to match the cool blue's displacement cuz all these Xenons just don't provide enough light.
I want to aim the bulb higher to match the cool blue's displacement cuz all these Xenons just don't provide enough light.
10-01-02 | 01:49 PM
#41
Thread Starter
Lexus Test Driver
Joined: Jun 2002
Posts: 893
Likes: 1
From: Chicago
Originally posted by Kyle Harty
You probably shouldn't do that, it'll probably cause alot more glare to other driver's.
You probably shouldn't do that, it'll probably cause alot more glare to other driver's.
10-01-02 | 01:50 PM
#42
Thread Starter
Lexus Test Driver
Joined: Jun 2002
Posts: 893
Likes: 1
From: Chicago
Originally posted by EGainer
Xenon, what do you think of my new sig idea, looks similar to yours I know....
Xenon, what do you think of my new sig idea, looks similar to yours I know....
