headlight help
10-05-02, 09:57 PM
#17
Driver School Candidate
Join Date: Sep 2002
Location: Alabama
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Nope no clip on my 94, but if there was then the reason why I didn't mention it was because it's so easy to take them out a 1st grader can do it!:eek: and I just forgot.
Last edited by dariusman19; 10-05-02 at 09:58 PM.
10-05-02, 10:10 PM
#18
Lexus Champion
sorry, they aren't clips, they are a form of holding device behind the division between the turn signal and the headlight. they are on the 94, i dont know about sean's, but they are on the 94. and they were on my 93 as well
10-08-02, 04:51 PM
#19
Driver
Thread Starter
Join Date: Sep 2002
Location: maryland
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by EGainer
i reposted the old thread i started a while ago so that you could see how to do it... check the headlight tutorial thread. i know that some people said if you can't get the headlight out, then you shouldn't do the clear corner mod, but remember, i posted how to get the headlight out a long time ago. so other people have used this and got the headlight out wtih some help. there's no problem in that, it's not difficult. and this is what CL is for
oh yeah, it's not just 3 screws. you forgot the clip, unless you have already broken that without knowing it was there.... in that case, then all you have is 3 screws...
sean, you forgot the clip too
i reposted the old thread i started a while ago so that you could see how to do it... check the headlight tutorial thread. i know that some people said if you can't get the headlight out, then you shouldn't do the clear corner mod, but remember, i posted how to get the headlight out a long time ago. so other people have used this and got the headlight out wtih some help. there's no problem in that, it's not difficult. and this is what CL is for
oh yeah, it's not just 3 screws. you forgot the clip, unless you have already broken that without knowing it was there.... in that case, then all you have is 3 screws...
sean, you forgot the clip too
and once i take that splashguard off how do i get the lil black clips to hold again?
10-10-02, 02:55 AM
#22
I'm gonna try this mod. Just did it on my CL...where I had to remove the entire front bumper first to get to the screws holding the housings. If I can do THAT, then anyone can get the ES housings out w/o a problem.
Thread
Thread Starter
Forum
Replies
Last Post