Black houseing on gs Headlight
02-23-12, 06:42 PM
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: IN
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Black houseing on gs Headlight
Okay guess i have seen alot of people on here that have the black housing on there gs headlights. Some have said that they done it there self. Is there a DIY on here for that. I have searched and havent what i am looking for. Any help would be great.
02-24-12, 02:53 PM
#2
Driver
iTrader: (1)
Join Date: Jan 2012
Location: ca
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Here is a start:
http://www.luxurymods.com/2gsdiyhidretrofit.aspx
Basically just bake your lights i like 240 for 10 min just to be safe. Make sure you have removed all the small parts from the back of the housing.
Seperate the lens from the housing, have some one help so that the glue doesnt fall on the the lens or the shroud.
there is one screw holding the shroud/ bezel to the housing...paint and reassemble. pretty easy but scary and time consuming...lol
Might as well do a retro while your opening the lights though.
I just did some ls460's
http://www.luxurymods.com/2gsdiyhidretrofit.aspx
Basically just bake your lights i like 240 for 10 min just to be safe. Make sure you have removed all the small parts from the back of the housing.
Seperate the lens from the housing, have some one help so that the glue doesnt fall on the the lens or the shroud.
there is one screw holding the shroud/ bezel to the housing...paint and reassemble. pretty easy but scary and time consuming...lol
Might as well do a retro while your opening the lights though.
I just did some ls460's
Thread
Thread Starter
Forum
Replies
Last Post
