Clearing the amber out of the taillight??
#16
Originally posted by Vik
It's not that easy as it seems. Aftermarket lights in most cases are different to factory lights. And if you put china made lights with factory ones - difference in quality will be well noticable.
It's not that easy as it seems. Aftermarket lights in most cases are different to factory lights. And if you put china made lights with factory ones - difference in quality will be well noticable.
#17
It had not occured to me that there may be an obvious difference form the originals to the aftermarket ones. I have been considering the corner swap myself. Definitely have to see them first hand. Mike's look pretty good...
#18
Originally posted by RA40
I have been considering the corner swap myself. Definitely have to see them first hand. Mike's look pretty good...
I have been considering the corner swap myself. Definitely have to see them first hand. Mike's look pretty good...
Best way to get setup you want is to buy full clear lights and paint it with spray Get your own style.
#20
Smoking is nice on some cars, but what I wanted you to do was to slightly darken the white strip to look like the 5-series or the M-series.
Originally posted by Lexkost
How about smoking ???????
How about smoking ???????
#21
I have the 2/3 red and 1/3 white rear lights and I tried putting on the coners and it looks nice, but it's not the look I was looking for, but it looks nice and the quality of the aftermarket lights is pretty good IMHO.
Originally posted by Vik
It's not that easy as it seems. Aftermarket lights in most cases are different to factory lights. And if you put china made lights with factory ones - difference in quality will be well noticable. So if possible try before you buy it.
IMHO best option is to replace factory ones with diamond red/clear aftermarket lights. Must be looking very good. I'll post picture of my setup later. Haven't got lights yet.
It's not that easy as it seems. Aftermarket lights in most cases are different to factory lights. And if you put china made lights with factory ones - difference in quality will be well noticable. So if possible try before you buy it.
IMHO best option is to replace factory ones with diamond red/clear aftermarket lights. Must be looking very good. I'll post picture of my setup later. Haven't got lights yet.
#22
I did not want to go with the white strip either so i just tinted out the amber part. I never really got a good picture of the rear but this is the best I could find. I like the look of the car a whole lot better now. I might continue the black strip so it would be a long black line as opposed to the long white line. what do you guys think?
#23
Originally posted by LS_4Will
I might continue the black strip so it would be a long black line as opposed to the long white line. what do you guys think?
I might continue the black strip so it would be a long black line as opposed to the long white line. what do you guys think?
I had Toyota Crown before and believe me - wide rear turn signals look very good at night.
#24
Originally posted by LS_4Will
I did not want to go with the white strip either so i just tinted out the amber part. I never really got a good picture of the rear but this is the best I could find. I like the look of the car a whole lot better now. I might continue the black strip so it would be a long black line as opposed to the long white line. what do you guys think?
I did not want to go with the white strip either so i just tinted out the amber part. I never really got a good picture of the rear but this is the best I could find. I like the look of the car a whole lot better now. I might continue the black strip so it would be a long black line as opposed to the long white line. what do you guys think?
#25
Vik- Yea I see what you are saying cause on the 300zx, there is a long turn signal and it does look pretty good at night, or atleast in the garage when im just messing around. I intially wanted to go JDM but I didnt want to spend toomuch money without the car becomng any faster. I'm saving up for a torque converter All n' all, the tint cost me about 20 bucks and I also tinted the front corners so there is no more amber anywhere on the car. It changes the whole appearance of the car for the better. it was a 20 bucks well spent.
caliness - Thanks I was running around with that set up for over a year now and i was pretty proud of myself when I came up with the idea
caliness - Thanks I was running around with that set up for over a year now and i was pretty proud of myself when I came up with the idea
#26
caliness - Thanks I was running around with that set up for over a year now and i was pretty proud of myself when I came up with the idea
Thread
Thread Starter
Forum
Replies
Last Post
YODAONE
LS - 1st and 2nd Gen (1990-2000)
8
02-10-18 04:05 PM