LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Questions on LS400 Mods

Thread Tools
 
Search this Thread
 
Old 09-03-04 | 03:52 PM
  #1  
AristoJade's Avatar
AristoJade
Thread Starter
Driver School Candidate
 
Joined: Aug 2004
Posts: 12
Likes: 0
From: California
Default Questions on LS400 Mods

hey guys,

my father has a '93 LS400, he loves it but wants better low end power, i suggested doing some exhaust work, but he doesn't want it to sound all cheesy. what is the best way to get better low end power? and if he wanted to do some exhaust work, which exhaust setup will provid with a deep sound and not all loud and ricey?

Thanks,
Tony
Old 09-04-04 | 07:15 AM
  #2  
persian451's Avatar
persian451
Lexus Test Driver
 
Joined: Mar 2003
Posts: 1,431
Likes: 1
From: California
Default

remember, the engine is a 4.0 V8, so any kind of exhaust work in general will have a nice deep growl to it. Unless you throw on some cheesy mufflers, then it might sound like a fart can. If you do some searching you'll find plenty of ideas. Good luck
Old 09-04-04 | 10:17 AM
  #3  
Woogie's Avatar
Woogie
Lexus Champion
 
Joined: May 2004
Posts: 2,265
Likes: 2
From: Washington
Default

run a bigger diameter setup on the exhaust tubing. As for the mufflers, i'd go with some flow masters. It'll be quite as heck at idle, but it'll have a deep growl once you hit the gas.
Old 09-04-04 | 11:43 AM
  #4  
AristoJade's Avatar
AristoJade
Thread Starter
Driver School Candidate
 
Joined: Aug 2004
Posts: 12
Likes: 0
From: California
Default

thanks for the input.....you think a couple flowmasters with a bigger catback would sound good? my father is picky as hell and doesn't want it cheesy

Tony
Old 09-04-04 | 11:44 AM
  #5  
AristoJade's Avatar
AristoJade
Thread Starter
Driver School Candidate
 
Joined: Aug 2004
Posts: 12
Likes: 0
From: California
Default

Originally posted by AristoJade
thanks for the input.....you think a couple flowmasters with a bigger catback would sound good? my father is picky as hell and doesn't want it cheesy

Tony
also, what is the stock catback diameter on the 93 LS 400

Tony
Old 09-04-04 | 06:55 PM
  #6  
RA40's Avatar
RA40
Super Moderator
iTrader: (6)
 
Joined: May 2003
Posts: 20,852
Likes: 474
From: California
Default

An alternate is to drop down slightly on tire size to reduce overall diameter. I dunno what size the UCF10/11 has, on the 20/21 it is about 26.7 with a 225/60-16, a 225/55-16 will drop it to 25.7 and this slight decrease will help in the lower range.

There is plenty of discussion about exhaust mods and you would do well to read through the header group buy thread in the GS forum. As well, the exhaust posts that jbrady has written up here.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Xenoblade
LS - 1st and 2nd Gen (1990-2000)
11
03-01-15 06:12 PM
7milesout
LS - 4th Gen (2007-2017)
18
01-12-15 08:04 AM
Kaiyin
LS - 1st and 2nd Gen (1990-2000)
18
08-06-12 08:27 PM
AllblackLS
LS - 1st and 2nd Gen (1990-2000)
45
04-02-08 07:04 AM
RTLEXSC
Performance & Maintenance
4
05-08-03 07:29 PM



Quick Reply: Questions on LS400 Mods



All times are GMT -7. The time now is 07:19 AM.