Chrome pillars underneath black on 91 LS...
#76
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by sha4000
i didnt know if i could pull the weather stripping loose
#79
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by Caoboy
will paint remover damage the chrome? why not use that? and as for the glue on the pillars...did ya try orange clean? that stuff works great getting gunky stuff off...and did you polish the pillars when u were done stripping/cleaning them?
#80
Driver
Thread Starter
Join Date: Apr 2005
Location: Texas
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
![Exclamation](https://www.clublexus.com/forums/images/icons/icon4.gif)
Originally Posted by joshnoel
I did not try paint remover. My buddy in a paint shop recomended (MEK Methol Ethol Keytone) and it worked ok just took forever and a lot of rubbing.Its what he uses to prep a car before prime and paint.It did not pit or damage chrome! Have not pollished chrome yet crappy weather today will park it in my shop and try to do it tomorrow will post results and use a better camera!
#82
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Originally Posted by PureDrifter
hmmm, isnt MEK what they use in glasswork-fiberglassing and etc. i think its used as the catalyst.
http://www.jamestowndistributors.com...earch;text;mek
Last edited by joshnoel; 10-30-05 at 09:12 PM.
#84
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just used a rag to wipe it on and let it sit for a minute then used a blade to get access off because it jelled up and became super tacky . MEK might not be the perfect application for this job but it worked for me. Plus the fact that it was 40 degrees in the shop i do not have a heater in there may have played a big factor it states on the can should be used in 80 degree enviroment. I did not tape anything becaues that stuff cleaned the rubber around the window jam also i was just careful and took my time
Thread
Thread Starter
Forum
Replies
Last Post
supdawg2u
LS - 1st and 2nd Gen (1990-2000)
11
03-22-08 09:11 PM
6spd
LS - 3rd Gen (2001-2006)
6
05-08-07 05:24 AM