clear lens for 98 ls400?
#1
Pole Position
Thread Starter
Join Date: Aug 2001
Location: California
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
clear lens for 98 ls400?
hello,
i would like to know anyone done clear corner lens for 98's ls400.
how do you take out the lens out at each side of front headlight?
i was going to take that orange plastic out but i can't pull it out of my car. i think i just have to pull it out little bit harder to forward but it doesn't come out easily. anyother screws than on the top?
thanks.
i would like to know anyone done clear corner lens for 98's ls400.
how do you take out the lens out at each side of front headlight?
i was going to take that orange plastic out but i can't pull it out of my car. i think i just have to pull it out little bit harder to forward but it doesn't come out easily. anyother screws than on the top?
thanks.
#2
Hey sup Steven,for my LS all you have to do is unscrew the top screw and pull real hard on the side lens to get it out it is just held in by a metal rod on the side lens that goes in a socket in the engine bay,but I am not sure about your model.Does'nt your LS manual tell you how to take them out?
As for getting the orange out,I think the back is covered with plastic you are gunna need a heat gun to crack it open first and see if the yellow lens can be taken out.If you are succesful you will be the first one I know to do this to a 98 model LS.
Yo man nice meeting you finally and those celsior mags were freakin awesome.See you at the next meet.
As for getting the orange out,I think the back is covered with plastic you are gunna need a heat gun to crack it open first and see if the yellow lens can be taken out.If you are succesful you will be the first one I know to do this to a 98 model LS.
Yo man nice meeting you finally and those celsior mags were freakin awesome.See you at the next meet.
#3
Sure as long as it is my car and could you add the photos in to my folder Eric's LS400 as well in the MSN Teamlexstacy photo album.
Last edited by LOTC; 10-02-01 at 08:55 PM.
#4
Pole Position
Thread Starter
Join Date: Aug 2001
Location: California
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
good morning.
i knew they had only one screw on each one.
i was trying to pull it out really hard but it didn't came out so i was kindda afraid to break something...
maybe i will try again.
ps> it was nice to meet everyone on the last meeting.
i am kidda busy doing systems for my ls400 and my civic's 6x9 install.
thanks!
i knew they had only one screw on each one.
i was trying to pull it out really hard but it didn't came out so i was kindda afraid to break something...
maybe i will try again.
ps> it was nice to meet everyone on the last meeting.
i am kidda busy doing systems for my ls400 and my civic's 6x9 install.
thanks!
Thread
Thread Starter
Forum
Replies
Last Post